- Homepage
- Workplace equipment
- Clamping devices
- Tool holder accessories
- Collet chucks
- Collets
- Collet chuck ER PROMAT
Workplace equipment
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 41mm · d: 6mm · L: 46mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 41mm · d: 8mm · L: 46mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 41mm · d: 10mm · L: 46mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 41mm · d: 12mm · L: 46mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 41mm · d: 14mm · L: 46mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 41mm · d: 16mm · L: 46mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 41mm · d: 18mm · L: 46mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 41mm · d: 20mm · L: 46mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 41mm · d: 22mm · L: 46mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 41mm · d: 25mm · L: 46mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Clamping Ø
Marker
Type
4000832964
6 mm
PROMAT
ER 40 / 472 E
4000832966
8 mm
PROMAT
ER 40 / 472 E
4000832968
10 mm
PROMAT
ER 40 / 472 E
4000832972
12 mm
PROMAT
ER 40 / 472 E
4000832974
14 mm
PROMAT
ER 40 / 472 E
4000832976
16 mm
PROMAT
ER 40 / 472 E
4000832978
18 mm
PROMAT
ER 40 / 472 E
4000832984
20 mm
PROMAT
ER 40 / 472 E
4000832986
22 mm
PROMAT
ER 40 / 472 E
4000832990
25 mm
PROMAT
ER 40 / 472 E
Please select a product variant to specifically search for it in the shops of our dealers.