- Homepage
- Tools
- Chip removal
- Drill bits
- Spotting drill
- NC spotting drill PROMAT
Tools
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,03mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,03mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,04mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,05mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,07mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,09mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,1mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,11mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,12mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,03mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,03mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,04mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,05mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,07mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,09mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,1mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,11mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,12mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,03mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,03mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,04mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,05mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,07mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,09mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,1mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,11mm/rev
Description:
HSS-Co · With straight shank in accordance with DIN 1835-A · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation Further technical information: · Feed in steel up to 800 N: 0,12mm/rev
Coating
Cutting material
Length of spiral
Marker
Nominal Ø
Overall length
Point angle
Download
4000860083
Uncoated
HSS-Co
12 mm
PROMAT
3 mm
46 mm
120 °
4000860084
Uncoated
HSS-Co
12 mm
PROMAT
4 mm
55 mm
120 °
4000860085
Uncoated
HSS-Co
14 mm
PROMAT
5 mm
62 mm
120 °
4000860086
Uncoated
HSS-Co
16 mm
PROMAT
6 mm
66 mm
120 °
4000860088
Uncoated
HSS-Co
21 mm
PROMAT
8 mm
79 mm
120 °
4000860090
Uncoated
HSS-Co
25 mm
PROMAT
10 mm
89 mm
120 °
4000860092
Uncoated
HSS-Co
30 mm
PROMAT
12 mm
102 mm
120 °
4000860096
Uncoated
HSS-Co
38 mm
PROMAT
16 mm
115 mm
120 °
4000860100
Uncoated
HSS-Co
45 mm
PROMAT
20 mm
131 mm
120 °
4000860103
Uncoated
HSS-Co
12 mm
PROMAT
3 mm
46 mm
90 °
4000860104
Uncoated
HSS-Co
12 mm
PROMAT
4 mm
55 mm
90 °
4000860105
Uncoated
HSS-Co
14 mm
PROMAT
5 mm
62 mm
90 °
4000860106
Uncoated
HSS-Co
16 mm
PROMAT
6 mm
66 mm
90 °
4000860108
Uncoated
HSS-Co
21 mm
PROMAT
8 mm
79 mm
90 °
4000860110
Uncoated
HSS-Co
25 mm
PROMAT
10 mm
89 mm
90 °
4000860112
Uncoated
HSS-Co
30 mm
PROMAT
12 mm
102 mm
90 °
4000860116
Uncoated
HSS-Co
38 mm
PROMAT
16 mm
115 mm
90 °
4000860120
Uncoated
HSS-Co
45 mm
PROMAT
20 mm
131 mm
90 °
4000861383
TiN-coated
HSS-Co
12 mm
PROMAT
3 mm
46 mm
90 °
4000861384
TiN-coated
HSS-Co
12 mm
PROMAT
4 mm
55 mm
90 °
4000861385
TiN-coated
HSS-Co
14 mm
PROMAT
5 mm
62 mm
90 °
4000861386
TiN-coated
HSS-Co
16 mm
PROMAT
6 mm
66 mm
90 °
4000861388
TiN-coated
HSS-Co
21 mm
PROMAT
8 mm
79 mm
90 °
4000861390
TiN-coated
HSS-Co
25 mm
PROMAT
10 mm
89 mm
90 °
4000861392
TiN-coated
HSS-Co
30 mm
PROMAT
12 mm
102 mm
90 °
4000861396
TiN-coated
HSS-Co
38 mm
PROMAT
16 mm
115 mm
90 °
4000861400
TiN-coated
HSS-Co
45 mm
PROMAT
20 mm
131 mm
90 °
Please select a product variant to specifically search for it in the shops of our dealers.
Search dealer
Your location
Filter
