- Homepage
- Tools
- Chip removal
- Drill bits
- Spotting drill
- NC spotting drill PROMAT
Tools
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,05mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,06mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,07mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,09mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,1mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,11mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,12mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,14mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,16mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,05mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,06mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,07mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,09mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,1mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,11mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,12mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,14mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,16mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,06mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,07mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,09mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,1mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,11mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,12mm/rev
Description:
Solid carbide · With straight shank in accordance with DIN 6535 - HA · Right-hand cutting · For position-accurate and fast drilling on NC machines and boring machines · For centring and chamfering of taps in a single operation · Especially suitable for high-strength steels, cast steel, grey cast iron, rust-free steels and non-ferrous metals Further technical information: · Feed in steel up to 800 N: 0,14mm/rev
Coating
Cutting material
Length of spiral
Marker
Nominal Ø
Overall length
Point angle
Download
4000865801
Uncoated
Solid carbide
10 mm
PROMAT
3 mm
45 mm
90 °
4000865802
Uncoated
Solid carbide
12 mm
PROMAT
4 mm
50 mm
90 °
4000865803
Uncoated
Solid carbide
15 mm
PROMAT
5 mm
50 mm
90 °
4000865804
Uncoated
Solid carbide
18 mm
PROMAT
6 mm
50 mm
90 °
4000865805
Uncoated
Solid carbide
23 mm
PROMAT
8 mm
60 mm
90 °
4000865806
Uncoated
Solid carbide
24 mm
PROMAT
10 mm
70 mm
90 °
4000865807
Uncoated
Solid carbide
24 mm
PROMAT
12 mm
70 mm
90 °
4000865808
Uncoated
Solid carbide
26 mm
PROMAT
16 mm
80 mm
90 °
4000865809
Uncoated
Solid carbide
35 mm
PROMAT
20 mm
100 mm
90 °
4000865810
TiAlN-coated
Solid carbide
10 mm
PROMAT
3 mm
45 mm
90 °
4000865811
TiAlN-coated
Solid carbide
12 mm
PROMAT
4 mm
50 mm
90 °
4000865812
TiAlN-coated
Solid carbide
15 mm
PROMAT
5 mm
50 mm
90 °
4000865813
TiAlN-coated
Solid carbide
18 mm
PROMAT
6 mm
50 mm
90 °
4000865814
TiAlN-coated
Solid carbide
23 mm
PROMAT
8 mm
60 mm
90 °
4000865815
TiAlN-coated
Solid carbide
24 mm
PROMAT
10 mm
70 mm
90 °
4000865816
TiAlN-coated
Solid carbide
24 mm
PROMAT
12 mm
70 mm
90 °
4000865817
TiAlN-coated
Solid carbide
26 mm
PROMAT
16 mm
80 mm
90 °
4000865818
TiAlN-coated
Solid carbide
35 mm
PROMAT
20 mm
100 mm
90 °
4000865820
Uncoated
Solid carbide
12 mm
PROMAT
4 mm
50 mm
120 °
4000865821
Uncoated
Solid carbide
15 mm
PROMAT
5 mm
50 mm
120 °
4000865822
Uncoated
Solid carbide
18 mm
PROMAT
6 mm
50 mm
120 °
4000865823
Uncoated
Solid carbide
23 mm
PROMAT
8 mm
60 mm
120 °
4000865824
Uncoated
Solid carbide
24 mm
PROMAT
10 mm
70 mm
120 °
4000865825
Uncoated
Solid carbide
24 mm
PROMAT
12 mm
70 mm
120 °
4000865826
Uncoated
Solid carbide
26 mm
PROMAT
16 mm
80 mm
120 °
Please select a product variant to specifically search for it in the shops of our dealers.
Search dealer
Your location
Filter
