- Homepage
- Tools
- Clamping devices
- Tool holder accessories
- Collet chucks
- Collets
- Collet chuck ER PROMAT
Tools
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 0.5 mm Further technical information: · D: 33mm · d: 2mm · L: 40mm · Clamp diameter bridging: Nominal dimensions minus 0.5mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 33mm · d: 3mm · L: 40mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 33mm · d: 4mm · L: 40mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 33mm · d: 5mm · L: 40mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 33mm · d: 6mm · L: 40mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 33mm · d: 7mm · L: 40mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 33mm · d: 8mm · L: 40mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 33mm · d: 9mm · L: 40mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 33mm · d: 10mm · L: 40mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 33mm · d: 11mm · L: 40mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 33mm · d: 12mm · L: 40mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 33mm · d: 13mm · L: 40mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 33mm · d: 14mm · L: 40mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 33mm · d: 15mm · L: 40mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 33mm · d: 16mm · L: 40mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 33mm · d: 18mm · L: 40mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 33mm · d: 20mm · L: 40mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Clamping Ø
Marker
Type
4000832938
2 mm
PROMAT
ER 32 / 470 E
4000832939
3 mm
PROMAT
ER 32 / 470 E
4000832940
4 mm
PROMAT
ER 32 / 470 E
4000832941
5 mm
PROMAT
ER 32 / 470 E
4000832942
6 mm
PROMAT
ER 32 / 470 E
4000832943
7 mm
PROMAT
ER 32 / 470 E
4000832944
8 mm
PROMAT
ER 32 / 470 E
4000832945
9 mm
PROMAT
ER 32 / 470 E
4000832946
10 mm
PROMAT
ER 32 / 470 E
4000832947
11 mm
PROMAT
ER 32 / 470 E
4000832948
12 mm
PROMAT
ER 32 / 470 E
4000832949
13 mm
PROMAT
ER 32 / 470 E
4000832951
14 mm
PROMAT
ER 32 / 470 E
4000832952
15 mm
PROMAT
ER 32 / 470 E
4000832953
16 mm
PROMAT
ER 32 / 470 E
4000832956
18 mm
PROMAT
ER 32 / 470 E
4000832958
20 mm
PROMAT
ER 32 / 470 E
Please select a product variant to specifically search for it in the shops of our dealers.