- Homepage
- Tools
- Clamping devices
- Tool holder accessories
- Collet chucks
- Collets
- Collet chuck ER PROMAT
Tools
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 0.5 mm Further technical information: · D: 17mm · d: 1mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 0.5mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 2mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 3mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 4mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 5mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 6mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 7mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 8mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 9mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 10mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm
Clamping Ø
Marker
Type
4000832910
1 mm
PROMAT
ER 16 / 426 E
4000832912
2 mm
PROMAT
ER 16 / 426 E
4000832914
3 mm
PROMAT
ER 16 / 426 E
4000832915
4 mm
PROMAT
ER 16 / 426 E
4000832916
5 mm
PROMAT
ER 16 / 426 E
4000832917
6 mm
PROMAT
ER 16 / 426 E
4000832918
7 mm
PROMAT
ER 16 / 426 E
4000832919
8 mm
PROMAT
ER 16 / 426 E
4000832920
9 mm
PROMAT
ER 16 / 426 E
4000832921
10 mm
PROMAT
ER 16 / 426 E
Please select a product variant to specifically search for it in the shops of our dealers.