- Homepage
- Tools
- Clamping devices
- Tool holder accessories
- Collet chucks
- Collets
- Collet chuck ER PROMAT
Tools
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: nominal dimensions minus 0.5 mm Further technical information: · D: 11.5mm · d: 1mm · L: 18mm · Clamp diameter bridging: Nominal dimensions minus 0.5mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: nominal dimensions minus 0.5 mm Further technical information: · D: 11.5mm · d: 1.5mm · L: 18mm · Clamp diameter bridging: Nominal dimensions minus 0.5mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: nominal dimensions minus 0.5 mm Further technical information: · D: 11.5mm · d: 2mm · L: 18mm · Clamp diameter bridging: Nominal dimensions minus 0.5mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: nominal dimensions minus 0.5 mm Further technical information: · D: 11.5mm · d: 2.5mm · L: 18mm · Clamp diameter bridging: Nominal dimensions minus 0.5mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: nominal dimensions minus 0.5 mm Further technical information: · D: 11.5mm · d: 3mm · L: 18mm · Clamp diameter bridging: Nominal dimensions minus 0.5mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: nominal dimensions minus 0.5 mm Further technical information: · D: 11.5mm · d: 3.5mm · L: 18mm · Clamp diameter bridging: Nominal dimensions minus 0.5mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: nominal dimensions minus 0.5 mm Further technical information: · D: 11.5mm · d: 4mm · L: 18mm · Clamp diameter bridging: Nominal dimensions minus 0.5mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: nominal dimensions minus 0.5 mm Further technical information: · D: 11.5mm · d: 4.5mm · L: 18mm · Clamp diameter bridging: Nominal dimensions minus 0.5mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: nominal dimensions minus 0.5 mm Further technical information: · D: 11.5mm · d: 5mm · L: 18mm · Clamp diameter bridging: Nominal dimensions minus 0.5mm
Description:
According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: nominal dimensions minus 0.5 mm Further technical information: · D: 11.5mm · d: 6mm · L: 18mm · Clamp diameter bridging: Nominal dimensions minus 0.5mm
Clamping Ø
Marker
Type
4000832848
1 mm
PROMAT
ER 11 / 4008 E
4000832849
1.5 mm
PROMAT
ER 11 / 4008 E
4000832850
2 mm
PROMAT
ER 11 / 4008 E
4000832851
2.5 mm
PROMAT
ER 11 / 4008 E
4000832855
3 mm
PROMAT
ER 11 / 4008 E
4000832857
3.5 mm
PROMAT
ER 11 / 4008 E
4000832858
4 mm
PROMAT
ER 11 / 4008 E
4000832859
4.5 mm
PROMAT
ER 11 / 4008 E
4000832860
5 mm
PROMAT
ER 11 / 4008 E
4000832863
6 mm
PROMAT
ER 11 / 4008 E
Please select a product variant to specifically search for it in the shops of our dealers.