According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 0.5 mm Further technical information: · D: 17mm · d: 1mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 0.5mm

According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 2mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm

According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 3mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm

According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 4mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm

According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 5mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm

According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 6mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm

According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 7mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm

According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 8mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm

According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 9mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm

According to DIN 6499-B · Suitable for draw-in collet chuck type ER · Intermediate dimensions are not necessary · The tools are held along the entire clamping length and can also be clamped on the guide chamfer · Concentricity and repeat accuracy: 5 µm Clamp diameter bridging: Nominal dimensions minus 1.0 mm Further technical information: · D: 17mm · d: 10mm · L: 27mm · Clamp diameter bridging: Nominal dimensions minus 1.0mm