High-strength, medium-viscosity · A 1-component anaerobic liquid plastic, cures on contact with metals when air is excluded · Replaces conventional fastening methods such as split pins, circlips and washers, high temperature range · Fixture time is reached after approx. 20 to 40 min. · Functional strength after 3 to 6 hours · Viscosity: 8,000 to 15,000 mPas (25 °C) · Gap filling capacity: 0.3 mm · Max. thread: M20 · Strength class DIN 30661: 3 · Breakaway torque: 20 to 35 Nm · Temperature range from -55 °C to +230 °C · Simply, reliably and permanently bonds, seals and secures threaded fasteners, parts to be joined, bearings and pipe joints · For use in motor construction, the automotive and motorcycle industries, electrical industry, mechanical engineering, mining, the food industry and turbine-operated and nuclear power stations · DVGW approved The pump dispenser enables simple dosing: No drips or continued discharge, no residues, precise dosing Further technical information: · Colour: Red · Breakaway torque: 20 to 35Nm · Max. gap bridging: 0,3mm · Approval: DVGW

High-strength, medium-viscosity · A 1-component anaerobic liquid plastic, cures on contact with metals when air is excluded · Replaces conventional fastening methods such as split pins, circlips and washers, high temperature range · Fixture time is reached after approx. 20 to 40 min. · Functional strength after 3 to 6 hours · Viscosity: 8,000 to 15,000 mPas (25 °C) · Gap filling capacity: 0.3 mm · Max. thread: M20 · Strength class DIN 30661: 3 · Breakaway torque: 20 to 35 Nm · Temperature range from -55 °C to +230 °C · Simply, reliably and permanently bonds, seals and secures threaded fasteners, parts to be joined, bearings and pipe joints · For use in motor construction, the automotive and motorcycle industries, electrical industry, mechanical engineering, mining, the food industry and turbine-operated and nuclear power stations · DVGW approved The pump dispenser enables simple dosing: No drips or continued discharge, no residues, precise dosing Further technical information: · Colour: Red · Breakaway torque: 20 to 35Nm · Max. gap bridging: 0,3mm · Approval: DVGW