Surface sealant PROMAT CHEMICALS

Thixotropic properties mean it can be used on vertical surfaces · Seals against low pressure (approx. 5 bar) immediately after joining the parts · Viscosity: 50,000 to 250,000 mPas (25 °C) · Gap filling capacity: 0.5 mm · Strength class DIN 30661: 2 · Tensile strength: 7 to 10 Nm · Shear strength to DIN 54452 8-13 Nm, load 7–10 Nm · Temperature-resistant from -55 °C to +150 °C · Handling strength after approx. 10 to 20 min. · Functional strength after 1 to 3 h · The surface sealant has a high pressure resistance immediately after the handling strength is reached · Max. pressure sealing capacity up to 350 bar, is achieved after full curing under exclusion of oxygen · Very good gap bridging · For use in the automotive industry, chemical and petrochemical industries, gasworks, waterworks and electricity works, pump construction, drilling platforms, etc. Further technical information: · Gap filling capacity: Max. 0.5mm · Colour: Red · Viscosity: High viscosity · Hand-tight: 10-20min · Thread: Max. M80 · Strength: Medium-strength