- Homepage
- Workplace equipment
- Chip removal
- Milling tools
- End mill
- End mill PROMAT
Workplace equipment
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Coating
Cutting material
Free grinding
Length of cutting edge
Length of insert
Marker
No. of cutters
Nominal Ø
Overall length
Shank design
Shank Ø
Standard
Type
Download
4000866370
Uncoated
HSS-Co8
- mm
12 mm
18 mm
PROMAT
4
3 mm
56 mm
DIN 1835 B
6 mm
DIN 844
N
4000866372
Uncoated
HSS-Co8
- mm
19 mm
25 mm
PROMAT
4
4 mm
63 mm
DIN 1835 B
6 mm
DIN 844
N
4000866374
Uncoated
HSS-Co8
- mm
24 mm
30 mm
PROMAT
4
5 mm
68 mm
DIN 1835 B
6 mm
DIN 844
N
4000866376
Uncoated
HSS-Co8
5,5 mm
24 mm
30 mm
PROMAT
4
6 mm
68 mm
DIN 1835 B
6 mm
DIN 844
N
4000866378
Uncoated
HSS-Co8
7,5 mm
38 mm
44 mm
PROMAT
4
8 mm
88 mm
DIN 1835 B
10 mm
DIN 844
N
4000866380
Uncoated
HSS-Co8
9,5 mm
45 mm
53 mm
PROMAT
4
10 mm
95 mm
DIN 1835 B
10 mm
DIN 844
N
4000866382
Uncoated
HSS-Co8
11,5 mm
53 mm
63 mm
PROMAT
4
12 mm
110 mm
DIN 1835 B
12 mm
DIN 844
N
4000866384
Uncoated
HSS-Co8
11,5 mm
53 mm
63 mm
PROMAT
4
14 mm
110 mm
DIN 1835 B
12 mm
DIN 844
N
4000866386
Uncoated
HSS-Co8
15 mm
63 mm
73 mm
PROMAT
4
16 mm
123 mm
DIN 1835 B
16 mm
DIN 844
N
4000866388
Uncoated
HSS-Co8
15 mm
63 mm
73 mm
PROMAT
4
18 mm
123 mm
DIN 1835 B
16 mm
DIN 844
N
4000866390
Uncoated
HSS-Co8
19 mm
75 mm
89 mm
PROMAT
4
20 mm
141 mm
DIN 1835 B
20 mm
DIN 844
N
4000866392
TiCN-coated
HSS-Co8
- mm
12 mm
18 mm
PROMAT
4
3 mm
56 mm
DIN 1835 B
6 mm
DIN 844
N
4000866394
TiCN-coated
HSS-Co8
- mm
19 mm
25 mm
PROMAT
4
4 mm
63 mm
DIN 1835 B
6 mm
DIN 844
N
4000866396
TiCN-coated
HSS-Co8
- mm
24 mm
30 mm
PROMAT
4
5 mm
68 mm
DIN 1835 B
6 mm
DIN 844
N
4000866398
TiCN-coated
HSS-Co8
5,5 mm
24 mm
30 mm
PROMAT
4
6 mm
68 mm
DIN 1835 B
6 mm
DIN 844
N
4000866400
TiCN-coated
HSS-Co8
7,5 mm
38 mm
44 mm
PROMAT
4
8 mm
88 mm
DIN 1835 B
10 mm
DIN 844
N
4000866402
TiCN-coated
HSS-Co8
9,5 mm
45 mm
53 mm
PROMAT
4
10 mm
95 mm
DIN 1835 B
10 mm
DIN 844
N
4000866404
TiCN-coated
HSS-Co8
11,5 mm
53 mm
63 mm
PROMAT
4
12 mm
110 mm
DIN 1835 B
12 mm
DIN 844
N
4000866406
TiCN-coated
HSS-Co8
11,5 mm
53 mm
63 mm
PROMAT
4
14 mm
110 mm
DIN 1835 B
12 mm
DIN 844
N
4000866408
TiCN-coated
HSS-Co8
15 mm
63 mm
73 mm
PROMAT
4
16 mm
123 mm
DIN 1835 B
16 mm
DIN 844
N
4000866410
TiCN-coated
HSS-Co8
15 mm
63 mm
73 mm
PROMAT
4
18 mm
123 mm
DIN 1835 B
16 mm
DIN 844
N
4000866412
TiCN-coated
HSS-Co8
19 mm
75 mm
89 mm
PROMAT
4
20 mm
141 mm
DIN 1835 B
20 mm
DIN 844
N
Please select a product variant to specifically search for it in the shops of our dealers.