- Homepage
- Workplace equipment
- Chip removal
- Milling tools
- Spiral flute router bit
- Drill groove milling cutter PROMAT
Workplace equipment
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Shank Ø: 10mm · Material qualification NF metals: Somewhat suitable · Free grinding: 6,5mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Shank Ø: 10mm · Material qualification NF metals: Somewhat suitable · Free grinding: 8,5mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Shank Ø: 12mm · Material qualification NF metals: Somewhat suitable · Free grinding: 10,5mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Shank Ø: 12mm · Material qualification NF metals: Somewhat suitable · Free grinding: 11,5mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Shank Ø: 12mm · Material qualification NF metals: Somewhat suitable · Free grinding: 11,5mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shank Ø: 6mm · Material qualification NF metals: Somewhat suitable · Free grinding: -mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shank Ø: 6mm · Material qualification NF metals: Somewhat suitable · Free grinding: -mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shank Ø: 6mm · Material qualification NF metals: Somewhat suitable · Free grinding: -mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shank Ø: 6mm · Material qualification NF metals: Somewhat suitable · Free grinding: 5,5mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shank Ø: 10mm · Material qualification NF metals: Somewhat suitable · Free grinding: 7,5mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shank Ø: 10mm · Material qualification NF metals: Somewhat suitable · Free grinding: 9,5mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shank Ø: 12mm · Material qualification NF metals: Somewhat suitable · Free grinding: 11,5mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shank Ø: 12mm · Material qualification NF metals: Somewhat suitable · Free grinding: 11,5mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shank Ø: 16mm · Material qualification NF metals: Somewhat suitable · Free grinding: 15mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shank Ø: 16mm · Material qualification NF metals: Somewhat suitable · Free grinding: 15mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shank Ø: 20mm · Material qualification NF metals: Somewhat suitable · Free grinding: 19mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Shank Ø: 6mm · Material qualification NF metals: Somewhat suitable · Free grinding: -mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Shank Ø: 6mm · Material qualification NF metals: Somewhat suitable · Free grinding: -mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Shank Ø: 6mm · Material qualification NF metals: Somewhat suitable · Free grinding: -mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Shank Ø: 6mm · Material qualification NF metals: Somewhat suitable · Free grinding: 5,5mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Shank Ø: 10mm · Material qualification NF metals: Somewhat suitable · Free grinding: 7,5mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Shank Ø: 10mm · Material qualification NF metals: Somewhat suitable · Free grinding: 9,5mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Shank Ø: 12mm · Material qualification NF metals: Somewhat suitable · Free grinding: 11,5mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Shank Ø: 12mm · Material qualification NF metals: Somewhat suitable · Free grinding: 11,5mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Shank Ø: 16mm · Material qualification NF metals: Somewhat suitable · Free grinding: 15mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Shank Ø: 16mm · Material qualification NF metals: Somewhat suitable · Free grinding: 15mm
Description:
HSS-Co8 · DIN 844 · Type N · Three-flute cutter · Long · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · Nominal Ø 9, 11, 13, 15 mm = tolerance h10, rest = e8 Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Shank Ø: 20mm · Material qualification NF metals: Somewhat suitable · Free grinding: 19mm
Coating
Cutting material
Length of cutting edge
Length of insert
Marker
No. of cutters
Nominal Ø
Overall length
Shank design
Standard
Type
Download
4000866021
TiCN-coated
HSS-Co8
16 mm
22 mm
PROMAT
3
7 mm
66 mm
DIN 1835 B
DIN 844
N
4000866023
TiCN-coated
HSS-Co8
19 mm
26 mm
PROMAT
3
9 mm
69 mm
DIN 1835 B
DIN 844
N
4000866025
TiCN-coated
HSS-Co8
22 mm
30 mm
PROMAT
3
11 mm
79 mm
DIN 1835 B
DIN 844
N
4000866027
TiCN-coated
HSS-Co8
26 mm
36 mm
PROMAT
3
13 mm
83 mm
DIN 1835 B
DIN 844
N
4000866029
TiCN-coated
HSS-Co8
26 mm
36 mm
PROMAT
3
15 mm
83 mm
DIN 1835 B
DIN 844
N
4000866222
Uncoated
HSS-Co8
8 mm
14 mm
PROMAT
3
3 mm
52 mm
DIN 1835 B
DIN 844
N
4000866224
Uncoated
HSS-Co8
11 mm
17 mm
PROMAT
3
4 mm
55 mm
DIN 1835 B
DIN 844
N
4000866226
Uncoated
HSS-Co8
13 mm
19 mm
PROMAT
3
5 mm
57 mm
DIN 1835 B
DIN 844
N
4000866228
Uncoated
HSS-Co8
13 mm
19 mm
PROMAT
3
6 mm
57 mm
DIN 1835 B
DIN 844
N
4000866230
Uncoated
HSS-Co8
19 mm
25 mm
PROMAT
3
8 mm
69 mm
DIN 1835 B
DIN 844
N
4000866232
Uncoated
HSS-Co8
22 mm
30 mm
PROMAT
3
10 mm
72 mm
DIN 1835 B
DIN 844
N
4000866234
Uncoated
HSS-Co8
26 mm
36 mm
PROMAT
3
12 mm
83 mm
DIN 1835 B
DIN 844
N
4000866236
Uncoated
HSS-Co8
26 mm
36 mm
PROMAT
3
14 mm
83 mm
DIN 1835 B
DIN 844
N
4000866238
Uncoated
HSS-Co8
32 mm
42 mm
PROMAT
3
16 mm
92 mm
DIN 1835 B
DIN 844
N
4000866240
Uncoated
HSS-Co8
32 mm
42 mm
PROMAT
3
18 mm
92 mm
DIN 1835 B
DIN 844
N
4000866242
Uncoated
HSS-Co8
38 mm
52 mm
PROMAT
3
20 mm
104 mm
DIN 1835 B
DIN 844
N
4000866244
TiCN-coated
HSS-Co8
8 mm
14 mm
PROMAT
3
3 mm
52 mm
DIN 1835 B
DIN 844
N
4000866246
TiCN-coated
HSS-Co8
11 mm
17 mm
PROMAT
3
4 mm
55 mm
DIN 1835 B
DIN 844
N
4000866248
TiCN-coated
HSS-Co8
13 mm
19 mm
PROMAT
3
5 mm
57 mm
DIN 1835 B
DIN 844
N
4000866250
TiCN-coated
HSS-Co8
13 mm
19 mm
PROMAT
3
6 mm
57 mm
DIN 1835 B
DIN 844
N
4000866252
TiCN-coated
HSS-Co8
19 mm
25 mm
PROMAT
3
8 mm
69 mm
DIN 1835 B
DIN 844
N
4000866254
TiCN-coated
HSS-Co8
22 mm
30 mm
PROMAT
3
10 mm
72 mm
DIN 1835 B
DIN 844
N
4000866256
TiCN-coated
HSS-Co8
26 mm
36 mm
PROMAT
3
12 mm
83 mm
DIN 1835 B
DIN 844
N
4000866258
TiCN-coated
HSS-Co8
26 mm
36 mm
PROMAT
3
14 mm
83 mm
DIN 1835 B
DIN 844
N
4000866260
TiCN-coated
HSS-Co8
32 mm
42 mm
PROMAT
3
16 mm
92 mm
DIN 1835 B
DIN 844
N
4000866262
TiCN-coated
HSS-Co8
32 mm
42 mm
PROMAT
3
18 mm
92 mm
DIN 1835 B
DIN 844
N
4000866264
TiCN-coated
HSS-Co8
38 mm
52 mm
PROMAT
3
20 mm
104 mm
DIN 1835 B
DIN 844
N
Please select a product variant to specifically search for it in the shops of our dealers.