- Homepage
- Tools
- Chip removal
- Drill bits
- Centre drill bit
- Centre drill bit PROMAT
Tools
Description:
HSS-Co · DIN 333 · Shape A · Right-hand cutting · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For the processing of materials with a strength of more than 800 N/mm² as well as rust-, acid-, and heat-resistant CrNi steels Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Countersink angle: 60°
Description:
HSS-Co · DIN 333 · Shape A · Right-hand cutting · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For the processing of materials with a strength of more than 800 N/mm² as well as rust-, acid-, and heat-resistant CrNi steels Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Countersink angle: 60°
Description:
HSS-Co · DIN 333 · Shape A · Right-hand cutting · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For the processing of materials with a strength of more than 800 N/mm² as well as rust-, acid-, and heat-resistant CrNi steels Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Countersink angle: 60°
Description:
HSS-Co · DIN 333 · Shape A · Right-hand cutting · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For the processing of materials with a strength of more than 800 N/mm² as well as rust-, acid-, and heat-resistant CrNi steels Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Countersink angle: 60°
Description:
HSS-Co · DIN 333 · Shape A · Right-hand cutting · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For the processing of materials with a strength of more than 800 N/mm² as well as rust-, acid-, and heat-resistant CrNi steels Further technical information: · Feed in steel up to 800 N: 0,03mm/rev · Countersink angle: 60°
Description:
HSS-Co · DIN 333 · Shape A · Right-hand cutting · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For the processing of materials with a strength of more than 800 N/mm² as well as rust-, acid-, and heat-resistant CrNi steels Further technical information: · Feed in steel up to 800 N: 0,03mm/rev · Countersink angle: 60°
Description:
HSS-Co · DIN 333 · Shape A · Right-hand cutting · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For the processing of materials with a strength of more than 800 N/mm² as well as rust-, acid-, and heat-resistant CrNi steels Further technical information: · Feed in steel up to 800 N: 0,03mm/rev · Countersink angle: 60°
Coating
Cutting direction
Cutting material
Marker
Nominal Ø
Overall length
Shank Ø
Shape
Standard
Download
4000861577
Uncoated
Right-hand cutting
HSS-Co
PROMAT
1 mm
31.5 mm
3.15 mm
A
DIN 333
4000861578
Uncoated
Right-hand cutting
HSS-Co
PROMAT
1.25 mm
31.5 mm
3.15 mm
A
DIN 333
4000861579
Uncoated
Right-hand cutting
HSS-Co
PROMAT
1.6 mm
35.5 mm
4 mm
A
DIN 333
4000861580
Uncoated
Right-hand cutting
HSS-Co
PROMAT
2 mm
40 mm
5 mm
A
DIN 333
4000861581
Uncoated
Right-hand cutting
HSS-Co
PROMAT
2.5 mm
45 mm
6.3 mm
A
DIN 333
4000861582
Uncoated
Right-hand cutting
HSS-Co
PROMAT
3.15 mm
50 mm
8 mm
A
DIN 333
4000861583
Uncoated
Right-hand cutting
HSS-Co
PROMAT
4 mm
56 mm
10 mm
A
DIN 333
Please select a product variant to specifically search for it in the shops of our dealers.