Tools
Description:
For boring bars · Slotted type · Shape E2 S · Reduces or prevents vibrations by clasping the boring bar · Also suitable for fully rounded boring bars with V-groove · Holders are as pierced in the shank wherever possible · Secured against fall-out in the turret through circlip · Slotted area to 16 mm 4 x D, 20 and 25 mm 3 x D, from 32 mm 2,5 x D · External and internal cooling possible · For pierced shank, length adjustment possible from the side of shank · Type A = Pierced Further technical information: · D: 44mm · Pierced: Yes · Type: A · L1: 73mm · L: 95mm · Shape: E2 S · d1: 30mm · Suitable for: Boring bars · d2: 10mm · Standard: DIN 69880
Description:
For boring bars · Slotted type · Shape E2 S · Reduces or prevents vibrations by clasping the boring bar · Also suitable for fully rounded boring bars with V-groove · Holders are as pierced in the shank wherever possible · Secured against fall-out in the turret through circlip · Slotted area to 16 mm 4 x D, 20 and 25 mm 3 x D, from 32 mm 2,5 x D · External and internal cooling possible · For pierced shank, length adjustment possible from the side of shank · Type A = Pierced Further technical information: · D: 46mm · Pierced: Yes · Type: A · L1: 73mm · L: 95mm · Shape: E2 S · d1: 30mm · Suitable for: Boring bars · d2: 12mm · Standard: DIN 69880
Description:
For boring bars · Slotted type · Shape E2 S · Reduces or prevents vibrations by clasping the boring bar · Also suitable for fully rounded boring bars with V-groove · Holders are as pierced in the shank wherever possible · Secured against fall-out in the turret through circlip · Slotted area to 16 mm 4 x D, 20 and 25 mm 3 x D, from 32 mm 2,5 x D · External and internal cooling possible · For pierced shank, length adjustment possible from the side of shank · Type A = Pierced Further technical information: · D: 50mm · Pierced: Yes · Type: A · L1: 73mm · L: 95mm · Shape: E2 S · d1: 30mm · Suitable for: Boring bars · d2: 16mm · Standard: DIN 69880
Description:
For boring bars · Slotted type · Shape E2 S · Reduces or prevents vibrations by clasping the boring bar · Also suitable for fully rounded boring bars with V-groove · Holders are as pierced in the shank wherever possible · Secured against fall-out in the turret through circlip · Slotted area to 16 mm 4 x D, 20 and 25 mm 3 x D, from 32 mm 2,5 x D · External and internal cooling possible · For pierced shank, length adjustment possible from the side of shank · Type B = Not pierced Further technical information: · D: 54mm · Pierced: No · Type: B · L1: 73mm · L: 95mm · Shape: E2 S · d1: 30mm · Suitable for: Boring bars · d2: 20mm · Standard: DIN 69880
Description:
For boring bars · Slotted type · Shape E2 S · Reduces or prevents vibrations by clasping the boring bar · Also suitable for fully rounded boring bars with V-groove · Holders are as pierced in the shank wherever possible · Secured against fall-out in the turret through circlip · Slotted area to 16 mm 4 x D, 20 and 25 mm 3 x D, from 32 mm 2,5 x D · External and internal cooling possible · For pierced shank, length adjustment possible from the side of shank · Type B = Not pierced Further technical information: · D: 59mm · Pierced: No · Type: B · L1: 90mm · L: 112mm · Shape: E2 S · d1: 30mm · Suitable for: Boring bars · d2: 25mm · Standard: DIN 69880
Description:
For boring bars · Slotted type · Shape E2 S · Reduces or prevents vibrations by clasping the boring bar · Also suitable for fully rounded boring bars with V-groove · Holders are as pierced in the shank wherever possible · Secured against fall-out in the turret through circlip · Slotted area to 16 mm 4 x D, 20 and 25 mm 3 x D, from 32 mm 2,5 x D · External and internal cooling possible · For pierced shank, length adjustment possible from the side of shank · Type B = Not pierced Further technical information: · D: 62mm · Pierced: No · Type: B · L1: 120mm · L: 142mm · Shape: E2 S · d1: 30mm · Suitable for: Boring bars · d2: 32mm · Standard: DIN 69880
Description:
For boring bars · Slotted type · Shape E2 S · Reduces or prevents vibrations by clasping the boring bar · Also suitable for fully rounded boring bars with V-groove · Holders are as pierced in the shank wherever possible · Secured against fall-out in the turret through circlip · Slotted area to 16 mm 4 x D, 20 and 25 mm 3 x D, from 32 mm 2,5 x D · External and internal cooling possible · For pierced shank, length adjustment possible from the side of shank · Type B = Not pierced Further technical information: · D: 62mm · Pierced: No · Type: B · L1: 120mm · L: 142mm · Shape: E2 S · d1: 30mm · Suitable for: Boring bars · d2: 40mm · Standard: DIN 69880
Description:
For boring bars · Slotted type · Shape E2 S · Reduces or prevents vibrations by clasping the boring bar · Also suitable for fully rounded boring bars with V-groove · Holders are as pierced in the shank wherever possible · Secured against fall-out in the turret through circlip · Slotted area to 16 mm 4 x D, 20 and 25 mm 3 x D, from 32 mm 2,5 x D · External and internal cooling possible · For pierced shank, length adjustment possible from the side of shank · Type A = Pierced Further technical information: · D: 46mm · Pierced: Yes · Type: A · L1: 73mm · L: 95mm · Shape: E2 S · d1: 40mm · Suitable for: Boring bars · d2: 10mm · Standard: DIN 69880
Description:
For boring bars · Slotted type · Shape E2 S · Reduces or prevents vibrations by clasping the boring bar · Also suitable for fully rounded boring bars with V-groove · Holders are as pierced in the shank wherever possible · Secured against fall-out in the turret through circlip · Slotted area to 16 mm 4 x D, 20 and 25 mm 3 x D, from 32 mm 2,5 x D · External and internal cooling possible · For pierced shank, length adjustment possible from the side of shank · Type A = Pierced Further technical information: · D: 46mm · Pierced: Yes · Type: A · L1: 73mm · L: 95mm · Shape: E2 S · d1: 40mm · Suitable for: Boring bars · d2: 12mm · Standard: DIN 69880
Description:
For boring bars · Slotted type · Shape E2 S · Reduces or prevents vibrations by clasping the boring bar · Also suitable for fully rounded boring bars with V-groove · Holders are as pierced in the shank wherever possible · Secured against fall-out in the turret through circlip · Slotted area to 16 mm 4 x D, 20 and 25 mm 3 x D, from 32 mm 2,5 x D · External and internal cooling possible · For pierced shank, length adjustment possible from the side of shank · Type A = Pierced Further technical information: · D: 50mm · Pierced: Yes · Type: A · L1: 73mm · L: 95mm · Shape: E2 S · d1: 40mm · Suitable for: Boring bars · d2: 16mm · Standard: DIN 69880
Description:
For boring bars · Slotted type · Shape E2 S · Reduces or prevents vibrations by clasping the boring bar · Also suitable for fully rounded boring bars with V-groove · Holders are as pierced in the shank wherever possible · Secured against fall-out in the turret through circlip · Slotted area to 16 mm 4 x D, 20 and 25 mm 3 x D, from 32 mm 2,5 x D · External and internal cooling possible · For pierced shank, length adjustment possible from the side of shank · Type A = Pierced Further technical information: · D: 54mm · Pierced: Yes · Type: A · L1: 73mm · L: 95mm · Shape: E2 S · d1: 40mm · Suitable for: Boring bars · d2: 20mm · Standard: DIN 69880
Description:
For boring bars · Slotted type · Shape E2 S · Reduces or prevents vibrations by clasping the boring bar · Also suitable for fully rounded boring bars with V-groove · Holders are as pierced in the shank wherever possible · Secured against fall-out in the turret through circlip · Slotted area to 16 mm 4 x D, 20 and 25 mm 3 x D, from 32 mm 2,5 x D · External and internal cooling possible · For pierced shank, length adjustment possible from the side of shank · Type B = Not pierced Further technical information: · D: 59mm · Pierced: No · Type: B · L1: 90mm · L: 112mm · Shape: E2 S · d1: 40mm · Suitable for: Boring bars · d2: 25mm · Standard: DIN 69880
Description:
For boring bars · Slotted type · Shape E2 S · Reduces or prevents vibrations by clasping the boring bar · Also suitable for fully rounded boring bars with V-groove · Holders are as pierced in the shank wherever possible · Secured against fall-out in the turret through circlip · Slotted area to 16 mm 4 x D, 20 and 25 mm 3 x D, from 32 mm 2,5 x D · External and internal cooling possible · For pierced shank, length adjustment possible from the side of shank · Type B = Not pierced Further technical information: · D: 65mm · Pierced: No · Type: B · L1: 120mm · L: 142mm · Shape: E2 S · d1: 40mm · Suitable for: Boring bars · d2: 32mm · Standard: DIN 69880
Description:
For boring bars · Slotted type · Shape E2 S · Reduces or prevents vibrations by clasping the boring bar · Also suitable for fully rounded boring bars with V-groove · Holders are as pierced in the shank wherever possible · Secured against fall-out in the turret through circlip · Slotted area to 16 mm 4 x D, 20 and 25 mm 3 x D, from 32 mm 2,5 x D · External and internal cooling possible · For pierced shank, length adjustment possible from the side of shank · Type B = Not pierced Further technical information: · D: 73mm · Pierced: No · Type: B · L1: 152mm · L: 174mm · Shape: E2 S · d1: 40mm · Suitable for: Boring bars · d2: 40mm · Standard: DIN 69880
Clamping Ø
Marker
Shank
4000833464
10 mm
PROMAT
VDI30
4000833473
12 mm
PROMAT
VDI30
4000833474
16 mm
PROMAT
VDI30
4000833478
20 mm
PROMAT
VDI30
4000833479
25 mm
PROMAT
VDI30
4000833483
32 mm
PROMAT
VDI30
4000833484
40 mm
PROMAT
VDI30
4000833486
10 mm
PROMAT
VDI40
4000833487
12 mm
PROMAT
VDI40
4000833488
16 mm
PROMAT
VDI40
4000833489
20 mm
PROMAT
VDI40
4000833490
25 mm
PROMAT
VDI40
4000833491
32 mm
PROMAT
VDI40
4000833492
40 mm
PROMAT
VDI40
Please select a product variant to specifically search for it in the shops of our dealers.