- Homepage
- Tools
- Chip removal
- Drill bits
- Twist drills
- Twist drills
- Deep-hole drill PROMAT
Tools
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,03mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,04mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,07mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,09mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,15mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,16mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,16mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,18mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Series 1
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,03mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,04mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,07mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,09mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,15mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,16mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,16mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,18mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Series 2
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,07mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,09mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,15mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,16mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,16mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,18mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Series 3
Description:
HSS-Co · DIN 1869 · Type TS · Point angle 130° · Profile-ground with crosswise grinding · With straight shank · Right-hand cutting · Extra-long type · Special drill for extreme bore depth, with marked thermal hardness resistance and with large chip space · For boring under difficult conditions, with high thermal demand · For the processing of steels and steel castings of high strength, grey cast iron, malleable cast iron, spheroidal cast iron etc. Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Series 3
Cutting material
Length of spiral
Marker
Nominal Ø
Overall length
Point angle
Shank design
Standard
Type
Download
4000865901
HSS-Co
85 mm
PROMAT
2 mm
125 mm
130 °
Straight shank
DIN 1869
TS
4000865902
HSS-Co
95 mm
PROMAT
2.5 mm
140 mm
130 °
Straight shank
DIN 1869
TS
4000865903
HSS-Co
100 mm
PROMAT
3 mm
150 mm
130 °
Straight shank
DIN 1869
TS
4000865904
HSS-Co
105 mm
PROMAT
3.2 mm
155 mm
130 °
Straight shank
DIN 1869
TS
4000865905
HSS-Co
105 mm
PROMAT
3.3 mm
155 mm
130 °
Straight shank
DIN 1869
TS
4000865906
HSS-Co
115 mm
PROMAT
3.5 mm
165 mm
130 °
Straight shank
DIN 1869
TS
4000865907
HSS-Co
120 mm
PROMAT
4 mm
175 mm
130 °
Straight shank
DIN 1869
TS
4000865908
HSS-Co
120 mm
PROMAT
4.2 mm
175 mm
130 °
Straight shank
DIN 1869
TS
4000865909
HSS-Co
125 mm
PROMAT
4.5 mm
185 mm
130 °
Straight shank
DIN 1869
TS
4000865910
HSS-Co
135 mm
PROMAT
5 mm
195 mm
130 °
Straight shank
DIN 1869
TS
4000865911
HSS-Co
140 mm
PROMAT
5.5 mm
205 mm
130 °
Straight shank
DIN 1869
TS
4000865912
HSS-Co
140 mm
PROMAT
6 mm
205 mm
130 °
Straight shank
DIN 1869
TS
4000865913
HSS-Co
150 mm
PROMAT
6.5 mm
215 mm
130 °
Straight shank
DIN 1869
TS
4000865914
HSS-Co
155 mm
PROMAT
6.8 mm
225 mm
130 °
Straight shank
DIN 1869
TS
4000865915
HSS-Co
155 mm
PROMAT
7 mm
225 mm
130 °
Straight shank
DIN 1869
TS
4000865916
HSS-Co
155 mm
PROMAT
7.5 mm
225 mm
130 °
Straight shank
DIN 1869
TS
4000865917
HSS-Co
165 mm
PROMAT
8 mm
240 mm
130 °
Straight shank
DIN 1869
TS
4000865918
HSS-Co
165 mm
PROMAT
8.5 mm
240 mm
130 °
Straight shank
DIN 1869
TS
4000865919
HSS-Co
175 mm
PROMAT
9 mm
250 mm
130 °
Straight shank
DIN 1869
TS
4000865920
HSS-Co
175 mm
PROMAT
9.5 mm
250 mm
130 °
Straight shank
DIN 1869
TS
4000865921
HSS-Co
185 mm
PROMAT
10 mm
265 mm
130 °
Straight shank
DIN 1869
TS
4000865922
HSS-Co
185 mm
PROMAT
10.2 mm
265 mm
130 °
Straight shank
DIN 1869
TS
4000865923
HSS-Co
185 mm
PROMAT
10.5 mm
265 mm
130 °
Straight shank
DIN 1869
TS
4000865924
HSS-Co
195 mm
PROMAT
11 mm
280 mm
130 °
Straight shank
DIN 1869
TS
4000865925
HSS-Co
195 mm
PROMAT
11.5 mm
280 mm
130 °
Straight shank
DIN 1869
TS
4000865926
HSS-Co
205 mm
PROMAT
12 mm
295 mm
130 °
Straight shank
DIN 1869
TS
4000865927
HSS-Co
110 mm
PROMAT
2 mm
160 mm
130 °
Straight shank
DIN 1869
TS
4000865928
HSS-Co
120 mm
PROMAT
2.5 mm
180 mm
130 °
Straight shank
DIN 1869
TS
4000865929
HSS-Co
130 mm
PROMAT
3 mm
190 mm
130 °
Straight shank
DIN 1869
TS
4000865930
HSS-Co
135 mm
PROMAT
3.2 mm
200 mm
130 °
Straight shank
DIN 1869
TS
4000865931
HSS-Co
145 mm
PROMAT
3.5 mm
210 mm
130 °
Straight shank
DIN 1869
TS
4000865932
HSS-Co
150 mm
PROMAT
4 mm
220 mm
130 °
Straight shank
DIN 1869
TS
4000865933
HSS-Co
150 mm
PROMAT
4.2 mm
220 mm
130 °
Straight shank
DIN 1869
TS
4000865934
HSS-Co
160 mm
PROMAT
4.5 mm
235 mm
130 °
Straight shank
DIN 1869
TS
4000865935
HSS-Co
170 mm
PROMAT
5 mm
245 mm
130 °
Straight shank
DIN 1869
TS
4000865936
HSS-Co
180 mm
PROMAT
5.5 mm
260 mm
130 °
Straight shank
DIN 1869
TS
4000865937
HSS-Co
180 mm
PROMAT
6 mm
260 mm
130 °
Straight shank
DIN 1869
TS
4000865938
HSS-Co
190 mm
PROMAT
6.5 mm
275 mm
130 °
Straight shank
DIN 1869
TS
4000865939
HSS-Co
200 mm
PROMAT
6.8 mm
290 mm
130 °
Straight shank
DIN 1869
TS
4000865940
HSS-Co
200 mm
PROMAT
7 mm
290 mm
130 °
Straight shank
DIN 1869
TS
4000865941
HSS-Co
200 mm
PROMAT
7.5 mm
290 mm
130 °
Straight shank
DIN 1869
TS
4000865942
HSS-Co
210 mm
PROMAT
8 mm
305 mm
130 °
Straight shank
DIN 1869
TS
4000865943
HSS-Co
210 mm
PROMAT
8.5 mm
305 mm
130 °
Straight shank
DIN 1869
TS
4000865944
HSS-Co
220 mm
PROMAT
9 mm
320 mm
130 °
Straight shank
DIN 1869
TS
4000865945
HSS-Co
220 mm
PROMAT
9.5 mm
320 mm
130 °
Straight shank
DIN 1869
TS
4000865946
HSS-Co
235 mm
PROMAT
10 mm
340 mm
130 °
Straight shank
DIN 1869
TS
4000865947
HSS-Co
235 mm
PROMAT
10.2 mm
340 mm
130 °
Straight shank
DIN 1869
TS
4000865948
HSS-Co
235 mm
PROMAT
10.5 mm
340 mm
130 °
Straight shank
DIN 1869
TS
4000865949
HSS-Co
250 mm
PROMAT
11 mm
365 mm
130 °
Straight shank
DIN 1869
TS
4000865950
HSS-Co
250 mm
PROMAT
11.5 mm
365 mm
130 °
Straight shank
DIN 1869
TS
4000865951
HSS-Co
260 mm
PROMAT
12 mm
375 mm
130 °
Straight shank
DIN 1869
TS
4000865952
HSS-Co
160 mm
PROMAT
3 mm
240 mm
130 °
Straight shank
DIN 1869
TS
4000865953
HSS-Co
170 mm
PROMAT
3.2 mm
250 mm
130 °
Straight shank
DIN 1869
TS
4000865954
HSS-Co
180 mm
PROMAT
3.5 mm
265 mm
130 °
Straight shank
DIN 1869
TS
4000865955
HSS-Co
190 mm
PROMAT
4 mm
280 mm
130 °
Straight shank
DIN 1869
TS
4000865956
HSS-Co
190 mm
PROMAT
4.2 mm
280 mm
130 °
Straight shank
DIN 1869
TS
4000865957
HSS-Co
200 mm
PROMAT
4.5 mm
295 mm
130 °
Straight shank
DIN 1869
TS
4000865958
HSS-Co
210 mm
PROMAT
5 mm
315 mm
130 °
Straight shank
DIN 1869
TS
4000865959
HSS-Co
225 mm
PROMAT
5.5 mm
330 mm
130 °
Straight shank
DIN 1869
TS
4000865960
HSS-Co
225 mm
PROMAT
6 mm
330 mm
130 °
Straight shank
DIN 1869
TS
4000865961
HSS-Co
235 mm
PROMAT
6.5 mm
350 mm
130 °
Straight shank
DIN 1869
TS
4000865962
HSS-Co
250 mm
PROMAT
6.8 mm
370 mm
130 °
Straight shank
DIN 1869
TS
4000865963
HSS-Co
250 mm
PROMAT
7 mm
370 mm
130 °
Straight shank
DIN 1869
TS
4000865964
HSS-Co
250 mm
PROMAT
7.5 mm
370 mm
130 °
Straight shank
DIN 1869
TS
4000865965
HSS-Co
265 mm
PROMAT
8 mm
390 mm
130 °
Straight shank
DIN 1869
TS
4000865966
HSS-Co
265 mm
PROMAT
8.5 mm
390 mm
130 °
Straight shank
DIN 1869
TS
4000865967
HSS-Co
280 mm
PROMAT
9 mm
410 mm
130 °
Straight shank
DIN 1869
TS
4000865968
HSS-Co
280 mm
PROMAT
9.5 mm
410 mm
130 °
Straight shank
DIN 1869
TS
4000865969
HSS-Co
295 mm
PROMAT
10 mm
430 mm
130 °
Straight shank
DIN 1869
TS
4000865970
HSS-Co
295 mm
PROMAT
10.2 mm
430 mm
130 °
Straight shank
DIN 1869
TS
4000865971
HSS-Co
295 mm
PROMAT
10.5 mm
430 mm
130 °
Straight shank
DIN 1869
TS
4000865972
HSS-Co
310 mm
PROMAT
11 mm
455 mm
130 °
Straight shank
DIN 1869
TS
4000865973
HSS-Co
310 mm
PROMAT
11.5 mm
455 mm
130 °
Straight shank
DIN 1869
TS
4000865974
HSS-Co
330 mm
PROMAT
12 mm
480 mm
130 °
Straight shank
DIN 1869
TS
Please select a product variant to specifically search for it in the shops of our dealers.