- Homepage
- Tools
- Chip removal
- Drill bits
- Twist drills
- Twist drills
- Twist drill PROMAT
Tools
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · With straight shank · For drilling even under maximum thermal stresses · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,05mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · With straight shank · For drilling even under maximum thermal stresses · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,05mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · With straight shank · For drilling even under maximum thermal stresses · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,05mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · With straight shank · For drilling even under maximum thermal stresses · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,05mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · With straight shank · For drilling even under maximum thermal stresses · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,05mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · With straight shank · For drilling even under maximum thermal stresses · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,05mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · With straight shank · For drilling even under maximum thermal stresses · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,05mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · With straight shank · For drilling even under maximum thermal stresses · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,05mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² · - Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,05mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,05mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,05mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,20mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,20mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,20mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,20mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,20mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,20mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,20mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,20mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,20mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,25mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,25mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · Vapour-tempered · DIN 338 · Type VA · Point angle 130 degrees · Profile-ground with crosswise grinding · Right-hand cutting · For drilling even under maximum thermal stresses · With 3-surface shank - prevents spinning in the drill chuck · For materials with high alloy content and strengths above 800 N/mm² Further technical information: · Cutting direction: Right · Feed in steel up to 800 N: 0,25mm/rev · Quality: Profile-ground
Coating
Cutting material
Drilling depth
Length of spiral
Marker
Nominal Ø
Overall length
Point angle
Shank design
Standard
Type
Working length
Download
4000862979
Vapour-tempered
HSS-Co5
5xd
12 mm
PROMAT
1 mm
34 mm
130 °
Straight shank
DIN 338
VA
12 mm
4000862980
Vapour-tempered
HSS-Co5
5xd
18 mm
PROMAT
1.5 mm
40 mm
130 °
Straight shank
DIN 338
VA
18 mm
4000862982
Vapour-tempered
HSS-Co5
5xd
24 mm
PROMAT
2 mm
49 mm
130 °
Straight shank
DIN 338
VA
24 mm
4000862983
Vapour-tempered
HSS-Co5
5xd
30 mm
PROMAT
2.5 mm
57 mm
130 °
Straight shank
DIN 338
VA
30 mm
4000862984
Vapour-tempered
HSS-Co5
5xd
33 mm
PROMAT
3 mm
61 mm
130 °
Straight shank
DIN 338
VA
33 mm
4000862985
Vapour-tempered
HSS-Co5
5xd
36 mm
PROMAT
3.2 mm
65 mm
130 °
Straight shank
DIN 338
VA
36 mm
4000862986
Vapour-tempered
HSS-Co5
5xd
36 mm
PROMAT
3.3 mm
65 mm
130 °
Straight shank
DIN 338
VA
36 mm
4000862987
Vapour-tempered
HSS-Co5
5xd
39 mm
PROMAT
3.5 mm
70 mm
130 °
Straight shank
DIN 338
VA
39 mm
4000862988
Vapour-tempered
HSS-Co5
5xd
43 mm
PROMAT
4 mm
75 mm
130 °
3-surface shank
DIN 338
VA
43 mm
4000862989
Vapour-tempered
HSS-Co5
5xd
43 mm
PROMAT
4.2 mm
75 mm
130 °
3-surface shank
DIN 338
VA
43 mm
4000862990
Vapour-tempered
HSS-Co5
5xd
47 mm
PROMAT
4.5 mm
80 mm
130 °
3-surface shank
DIN 338
VA
47 mm
4000862991
Vapour-tempered
HSS-Co5
5xd
52 mm
PROMAT
5 mm
86 mm
130 °
3-surface shank
DIN 338
VA
52 mm
4000862992
Vapour-tempered
HSS-Co5
5xd
52 mm
PROMAT
5.2 mm
86 mm
130 °
3-surface shank
DIN 338
VA
52 mm
4000862993
Vapour-tempered
HSS-Co5
5xd
57 mm
PROMAT
5.5 mm
93 mm
130 °
3-surface shank
DIN 338
VA
57 mm
4000862994
Vapour-tempered
HSS-Co5
5xd
57 mm
PROMAT
6 mm
93 mm
130 °
3-surface shank
DIN 338
VA
57 mm
4000862995
Vapour-tempered
HSS-Co5
5xd
63 mm
PROMAT
6.5 mm
101 mm
130 °
3-surface shank
DIN 338
VA
63 mm
4000862996
Vapour-tempered
HSS-Co5
5xd
69 mm
PROMAT
6.8 mm
109 mm
130 °
3-surface shank
DIN 338
VA
69 mm
4000862997
Vapour-tempered
HSS-Co5
5xd
69 mm
PROMAT
7 mm
109 mm
130 °
3-surface shank
DIN 338
VA
69 mm
4000862998
Vapour-tempered
HSS-Co5
5xd
69 mm
PROMAT
7.5 mm
109 mm
130 °
3-surface shank
DIN 338
VA
69 mm
4000862999
Vapour-tempered
HSS-Co5
5xd
75 mm
PROMAT
8 mm
117 mm
130 °
3-surface shank
DIN 338
VA
75 mm
4000863000
Vapour-tempered
HSS-Co5
5xd
75 mm
PROMAT
8.5 mm
117 mm
130 °
3-surface shank
DIN 338
VA
75 mm
4000863001
Vapour-tempered
HSS-Co5
5xd
81 mm
PROMAT
9 mm
125 mm
130 °
3-surface shank
DIN 338
VA
81 mm
4000863002
Vapour-tempered
HSS-Co5
5xd
81 mm
PROMAT
9.5 mm
125 mm
130 °
3-surface shank
DIN 338
VA
81 mm
4000863003
Vapour-tempered
HSS-Co5
5xd
87 mm
PROMAT
10 mm
133 mm
130 °
3-surface shank
DIN 338
VA
87 mm
4000863004
Vapour-tempered
HSS-Co5
5xd
87 mm
PROMAT
10.2 mm
133 mm
130 °
3-surface shank
DIN 338
VA
87 mm
4000863005
Vapour-tempered
HSS-Co5
5xd
87 mm
PROMAT
10.5 mm
133 mm
130 °
3-surface shank
DIN 338
VA
87 mm
4000863006
Vapour-tempered
HSS-Co5
5xd
94 mm
PROMAT
11 mm
142 mm
130 °
3-surface shank
DIN 338
VA
94 mm
4000863007
Vapour-tempered
HSS-Co5
5xd
94 mm
PROMAT
11.5 mm
142 mm
130 °
3-surface shank
DIN 338
VA
94 mm
4000863008
Vapour-tempered
HSS-Co5
5xd
101 mm
PROMAT
12 mm
151 mm
130 °
3-surface shank
DIN 338
VA
101 mm
4000863009
Vapour-tempered
HSS-Co5
5xd
101 mm
PROMAT
12.5 mm
151 mm
130 °
3-surface shank
DIN 338
VA
101 mm
4000863010
Vapour-tempered
HSS-Co5
5xd
101 mm
PROMAT
13 mm
151 mm
130 °
3-surface shank
DIN 338
VA
101 mm
Please select a product variant to specifically search for it in the shops of our dealers.