- Homepage
- Tools
- Chip removal
- Drill bits
- Twist drills
- Twist drills
- Twist drill PROMAT
Tools
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Size of shank: MK1 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Size of shank: MK1 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Size of shank: MK1 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Size of shank: MK1 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Size of shank: MK1 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Size of shank: MK1 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Size of shank: MK1 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Size of shank: MK1 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Size of shank: MK1 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Size of shank: MK1 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Size of shank: MK1 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,21mm/rev · Size of shank: MK1 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,21mm/rev · Size of shank: MK1 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,21mm/rev · Size of shank: MK1 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,22mm/rev · Size of shank: MK1 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,22mm/rev · Size of shank: MK1 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,23mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,23mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,23mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,24mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,24mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,24mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,25mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,25mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,25mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,26mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,27mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,28mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,28mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,29mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,29mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,3mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,3mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,3mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,31mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,31mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,32mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,32mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,33mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,33mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,34mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,34mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,35mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,35mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,36mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,36mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,37mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,37mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,38mm/rev · Size of shank: MK2 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,39mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,39mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,41mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,41mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,42mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,4mm/rev · Size of shank: MK3 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,41mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,41mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,42mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,43mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,43mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,44mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,45mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,46mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,47mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,47mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,49mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,49mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,5mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,51mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,5mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,52mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,55mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,57mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,59mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,6mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,62mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,64mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,66mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,63mm/rev · Size of shank: MK4 · Quality: Profile-ground
Description:
HSS · DIN 345 · Type N · Point angle 118° · Groove milled from Ø 14 mm · Profile-ground chamfer and cutting edge · With Morse taper · Right-hand cutting · For all standard drilling operations in steel and cast iron · With pointed cross-cut according to DIN 1412 A Further technical information: · Feed in steel up to 800 N: 0,76mm/rev · Size of shank: MK5 · Quality: Profile-ground
Cutting material
Length of spiral
Marker
Nominal Ø
Overall length
Point angle
Standard
Type
Download
4000861600
HSS
87 mm
PROMAT
10 mm
168 mm
118 °
DIN 345
N
4000861602
HSS
87 mm
PROMAT
10.25 mm
168 mm
118 °
DIN 345
N
4000861607
HSS
94 mm
PROMAT
10.75 mm
175 mm
118 °
DIN 345
N
4000861610
HSS
94 mm
PROMAT
11 mm
175 mm
118 °
DIN 345
N
4000861612
HSS
94 mm
PROMAT
11.25 mm
175 mm
118 °
DIN 345
N
4000861615
HSS
94 mm
PROMAT
11.5 mm
175 mm
118 °
DIN 345
N
4000861617
HSS
94 mm
PROMAT
11.75 mm
175 mm
118 °
DIN 345
N
4000861620
HSS
101 mm
PROMAT
12 mm
182 mm
118 °
DIN 345
N
4000861622
HSS
101 mm
PROMAT
12.25 mm
182 mm
118 °
DIN 345
N
4000861625
HSS
101 mm
PROMAT
12.5 mm
182 mm
118 °
DIN 345
N
4000861627
HSS
101 mm
PROMAT
12.75 mm
182 mm
118 °
DIN 345
N
4000861641
HSS
101 mm
PROMAT
13 mm
182 mm
118 °
DIN 345
N
4000861642
HSS
108 mm
PROMAT
13.25 mm
189 mm
118 °
DIN 345
N
4000861644
HSS
108 mm
PROMAT
13.5 mm
189 mm
118 °
DIN 345
N
4000861646
HSS
108 mm
PROMAT
13.75 mm
189 mm
118 °
DIN 345
N
4000861647
HSS
108 mm
PROMAT
14 mm
189 mm
118 °
DIN 345
N
4000861648
HSS
114 mm
PROMAT
14.25 mm
212 mm
118 °
DIN 345
N
4000861649
HSS
114 mm
PROMAT
14.5 mm
212 mm
118 °
DIN 345
N
4000861650
HSS
114 mm
PROMAT
14.75 mm
212 mm
118 °
DIN 345
N
4000861651
HSS
114 mm
PROMAT
15 mm
212 mm
118 °
DIN 345
N
4000861652
HSS
120 mm
PROMAT
15.25 mm
218 mm
118 °
DIN 345
N
4000861653
HSS
120 mm
PROMAT
15.5 mm
218 mm
118 °
DIN 345
N
4000861654
HSS
120 mm
PROMAT
15.75 mm
218 mm
118 °
DIN 345
N
4000861655
HSS
120 mm
PROMAT
16 mm
218 mm
118 °
DIN 345
N
4000861656
HSS
125 mm
PROMAT
16.25 mm
223 mm
118 °
DIN 345
N
4000861657
HSS
125 mm
PROMAT
16.5 mm
223 mm
118 °
DIN 345
N
4000861660
HSS
130 mm
PROMAT
17.25 mm
228 mm
118 °
DIN 345
N
4000861662
HSS
130 mm
PROMAT
17.75 mm
228 mm
118 °
DIN 345
N
4000861663
HSS
130 mm
PROMAT
18 mm
228 mm
118 °
DIN 345
N
4000861664
HSS
135 mm
PROMAT
18.25 mm
233 mm
118 °
DIN 345
N
4000861665
HSS
135 mm
PROMAT
18.5 mm
233 mm
118 °
DIN 345
N
4000861666
HSS
135 mm
PROMAT
18.75 mm
233 mm
118 °
DIN 345
N
4000861667
HSS
135 mm
PROMAT
19 mm
233 mm
118 °
DIN 345
N
4000861668
HSS
140 mm
PROMAT
19.25 mm
238 mm
118 °
DIN 345
N
4000861669
HSS
140 mm
PROMAT
19.5 mm
238 mm
118 °
DIN 345
N
4000861670
HSS
140 mm
PROMAT
19.75 mm
238 mm
118 °
DIN 345
N
4000861671
HSS
140 mm
PROMAT
20 mm
238 mm
118 °
DIN 345
N
4000861672
HSS
145 mm
PROMAT
20.25 mm
243 mm
118 °
DIN 345
N
4000861673
HSS
145 mm
PROMAT
20.5 mm
243 mm
118 °
DIN 345
N
4000861674
HSS
145 mm
PROMAT
20.75 mm
243 mm
118 °
DIN 345
N
4000861675
HSS
145 mm
PROMAT
21 mm
243 mm
118 °
DIN 345
N
4000861676
HSS
150 mm
PROMAT
21.25 mm
248 mm
118 °
DIN 345
N
4000861677
HSS
150 mm
PROMAT
21.5 mm
248 mm
118 °
DIN 345
N
4000861678
HSS
150 mm
PROMAT
21.75 mm
248 mm
118 °
DIN 345
N
4000861679
HSS
150 mm
PROMAT
22 mm
248 mm
118 °
DIN 345
N
4000861680
HSS
150 mm
PROMAT
22.25 mm
248 mm
118 °
DIN 345
N
4000861681
HSS
155 mm
PROMAT
22.5 mm
253 mm
118 °
DIN 345
N
4000861682
HSS
155 mm
PROMAT
22.75 mm
253 mm
118 °
DIN 345
N
4000861683
HSS
155 mm
PROMAT
23 mm
253 mm
118 °
DIN 345
N
4000861684
HSS
155 mm
PROMAT
23.25 mm
276 mm
118 °
DIN 345
N
4000861685
HSS
155 mm
PROMAT
23.5 mm
276 mm
118 °
DIN 345
N
4000861687
HSS
160 mm
PROMAT
24 mm
281 mm
118 °
DIN 345
N
4000861688
HSS
160 mm
PROMAT
24.25 mm
281 mm
118 °
DIN 345
N
4000861689
HSS
160 mm
PROMAT
24.5 mm
281 mm
118 °
DIN 345
N
4000861690
HSS
160 mm
PROMAT
24.75 mm
281 mm
118 °
DIN 345
N
4000861691
HSS
160 mm
PROMAT
25 mm
281 mm
118 °
DIN 345
N
4000861692
HSS
160 mm
PROMAT
25.25 mm
281 mm
118 °
DIN 345
N
4000861693
HSS
165 mm
PROMAT
25.5 mm
286 mm
118 °
DIN 345
N
4000861694
HSS
165 mm
PROMAT
25.75 mm
286 mm
118 °
DIN 345
N
4000861695
HSS
165 mm
PROMAT
26 mm
286 mm
118 °
DIN 345
N
4000861696
HSS
165 mm
PROMAT
26.25 mm
286 mm
118 °
DIN 345
N
4000861699
HSS
170 mm
PROMAT
27 mm
291 mm
118 °
DIN 345
N
4000861700
HSS
170 mm
PROMAT
27.25 mm
291 mm
118 °
DIN 345
N
4000861702
HSS
170 mm
PROMAT
27.75 mm
291 mm
118 °
DIN 345
N
4000861703
HSS
170 mm
PROMAT
28 mm
291 mm
118 °
DIN 345
N
4000861704
HSS
175 mm
PROMAT
28.25 mm
296 mm
118 °
DIN 345
N
4000861705
HSS
175 mm
PROMAT
28.5 mm
296 mm
118 °
DIN 345
N
4000861706
HSS
175 mm
PROMAT
28.75 mm
296 mm
118 °
DIN 345
N
4000861708
HSS
175 mm
PROMAT
29.25 mm
296 mm
118 °
DIN 345
N
4000861709
HSS
175 mm
PROMAT
29.5 mm
296 mm
118 °
DIN 345
N
4000861710
HSS
175 mm
PROMAT
29.75 mm
296 mm
118 °
DIN 345
N
4000861711
HSS
175 mm
PROMAT
30 mm
296 mm
118 °
DIN 345
N
4000861713
HSS
180 mm
PROMAT
30.5 mm
301 mm
118 °
DIN 345
N
4000861714
HSS
180 mm
PROMAT
31 mm
301 mm
118 °
DIN 345
N
4000861715
HSS
180 mm
PROMAT
31.5 mm
301 mm
118 °
DIN 345
N
4000861716
HSS
185 mm
PROMAT
32 mm
334 mm
118 °
DIN 345
N
4000861717
HSS
185 mm
PROMAT
32.5 mm
334 mm
118 °
DIN 345
N
4000861718
HSS
185 mm
PROMAT
33 mm
334 mm
118 °
DIN 345
N
4000861719
HSS
185 mm
PROMAT
33.5 mm
334 mm
118 °
DIN 345
N
4000861720
HSS
190 mm
PROMAT
34 mm
339 mm
118 °
DIN 345
N
4000861721
HSS
190 mm
PROMAT
34.5 mm
339 mm
118 °
DIN 345
N
4000861722
HSS
190 mm
PROMAT
35 mm
339 mm
118 °
DIN 345
N
4000861724
HSS
195 mm
PROMAT
36 mm
344 mm
118 °
DIN 345
N
4000861725
HSS
195 mm
PROMAT
36.5 mm
344 mm
118 °
DIN 345
N
4000861726
HSS
195 mm
PROMAT
37 mm
344 mm
118 °
DIN 345
N
4000861728
HSS
200 mm
PROMAT
38 mm
349 mm
118 °
DIN 345
N
4000861729
HSS
200 mm
PROMAT
38.5 mm
349 mm
118 °
DIN 345
N
4000861730
HSS
200 mm
PROMAT
39 mm
349 mm
118 °
DIN 345
N
4000861731
HSS
200 mm
PROMAT
39.5 mm
349 mm
118 °
DIN 345
N
4000861732
HSS
200 mm
PROMAT
40 mm
349 mm
118 °
DIN 345
N
4000861734
HSS
205 mm
PROMAT
41 mm
354 mm
118 °
DIN 345
N
4000861738
HSS
210 mm
PROMAT
43 mm
359 mm
118 °
DIN 345
N
4000861740
HSS
210 mm
PROMAT
44 mm
359 mm
118 °
DIN 345
N
4000861742
HSS
210 mm
PROMAT
45 mm
359 mm
118 °
DIN 345
N
4000861744
HSS
215 mm
PROMAT
46 mm
364 mm
118 °
DIN 345
N
4000861746
HSS
215 mm
PROMAT
47 mm
364 mm
118 °
DIN 345
N
4000861748
HSS
220 mm
PROMAT
48 mm
369 mm
118 °
DIN 345
N
4000861750
HSS
220 mm
PROMAT
49 mm
369 mm
118 °
DIN 345
N
4000861752
HSS
220 mm
PROMAT
50 mm
369 mm
118 °
DIN 345
N
4000861753
HSS
235 mm
PROMAT
60 mm
422 mm
118 °
DIN 345
N
Please select a product variant to specifically search for it in the shops of our dealers.