- Homepage
- Tools
- Chip removal
- Drill bits
- Twist drills
- Twist drills
- Twist drill PROMAT
Tools
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,03mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,04mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,05mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,06mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,08mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,08mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,08mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,08mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,09mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,1mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,1mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,11mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,11mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,11mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,12mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,13mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,13mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,13mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,14mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,15mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,15mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,16mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,17mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,18mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,19mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,2mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,21mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,23mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,24mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,25mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,26mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,26mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,28mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,29mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,3mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,31mm/rev
Description:
HSS · DIN 338 · Type W · Point angle 130° · Profile-ground · With straight shank · Right-hand cutting · For soft and long-chip processing materials such as aluminium alloys (long-chip processing), zinc, silumin, refinery copper, electron, zamak, plastics (soft), lead and wood Industrial quality Further technical information: · Quality: Profile-ground · Feed in Al wrought alloy: 0,33mm/rev
Cutting material
Length of spiral
Marker
Nominal Ø
Overall length
Point angle
Shank design
Standard
Type
Download
4000863781
HSS
12 mm
PROMAT
1 mm
34 mm
130 °
Straight shank
DIN 338
W
4000863786
HSS
18 mm
PROMAT
1.5 mm
40 mm
130 °
Straight shank
DIN 338
W
4000863791
HSS
24 mm
PROMAT
2 mm
49 mm
130 °
Straight shank
DIN 338
W
4000863796
HSS
30 mm
PROMAT
2.5 mm
57 mm
130 °
Straight shank
DIN 338
W
4000863801
HSS
33 mm
PROMAT
3 mm
61 mm
130 °
Straight shank
DIN 338
W
4000863802
HSS
33 mm
PROMAT
3.1 mm
61 mm
130 °
Straight shank
DIN 338
W
4000863803
HSS
36 mm
PROMAT
3.2 mm
65 mm
130 °
Straight shank
DIN 338
W
4000863804
HSS
36 mm
PROMAT
3.3 mm
65 mm
130 °
Straight shank
DIN 338
W
4000863806
HSS
39 mm
PROMAT
3.5 mm
70 mm
130 °
Straight shank
DIN 338
W
4000863811
HSS
43 mm
PROMAT
4 mm
75 mm
130 °
Straight shank
DIN 338
W
4000863812
HSS
43 mm
PROMAT
4.1 mm
75 mm
130 °
Straight shank
DIN 338
W
4000863813
HSS
43 mm
PROMAT
4.2 mm
75 mm
130 °
Straight shank
DIN 338
W
4000863814
HSS
43 mm
PROMAT
4.3 mm
75 mm
130 °
Straight shank
DIN 338
W
4000863816
HSS
47 mm
PROMAT
4.5 mm
80 mm
130 °
Straight shank
DIN 338
W
4000863819
HSS
52 mm
PROMAT
4.8 mm
86 mm
130 °
Straight shank
DIN 338
W
4000863821
HSS
52 mm
PROMAT
5 mm
86 mm
130 °
Straight shank
DIN 338
W
4000863822
HSS
52 mm
PROMAT
5.1 mm
86 mm
130 °
Straight shank
DIN 338
W
4000863823
HSS
52 mm
PROMAT
5.2 mm
86 mm
130 °
Straight shank
DIN 338
W
4000863826
HSS
57 mm
PROMAT
5.5 mm
93 mm
130 °
Straight shank
DIN 338
W
4000863829
HSS
57 mm
PROMAT
5.8 mm
93 mm
130 °
Straight shank
DIN 338
W
4000863831
HSS
57 mm
PROMAT
6 mm
93 mm
130 °
Straight shank
DIN 338
W
4000863836
HSS
63 mm
PROMAT
6.5 mm
101 mm
130 °
Straight shank
DIN 338
W
4000863839
HSS
69 mm
PROMAT
6.8 mm
109 mm
130 °
Straight shank
DIN 338
W
4000863841
HSS
69 mm
PROMAT
7 mm
109 mm
130 °
Straight shank
DIN 338
W
4000863846
HSS
69 mm
PROMAT
7.5 mm
109 mm
130 °
Straight shank
DIN 338
W
4000863851
HSS
75 mm
PROMAT
8 mm
117 mm
130 °
Straight shank
DIN 338
W
4000863856
HSS
75 mm
PROMAT
8.5 mm
117 mm
130 °
Straight shank
DIN 338
W
4000863861
HSS
81 mm
PROMAT
9 mm
125 mm
130 °
Straight shank
DIN 338
W
4000863866
HSS
81 mm
PROMAT
9.5 mm
125 mm
130 °
Straight shank
DIN 338
W
4000863871
HSS
87 mm
PROMAT
10 mm
133 mm
130 °
Straight shank
DIN 338
W
4000863872
HSS
87 mm
PROMAT
10.2 mm
133 mm
130 °
Straight shank
DIN 338
W
4000863873
HSS
87 mm
PROMAT
10.5 mm
133 mm
130 °
Straight shank
DIN 338
W
4000863874
HSS
94 mm
PROMAT
11 mm
142 mm
130 °
Straight shank
DIN 338
W
4000863875
HSS
94 mm
PROMAT
11.5 mm
142 mm
130 °
Straight shank
DIN 338
W
4000863876
HSS
101 mm
PROMAT
12 mm
151 mm
130 °
Straight shank
DIN 338
W
4000863877
HSS
101 mm
PROMAT
12.5 mm
151 mm
130 °
Straight shank
DIN 338
W
4000863878
HSS
101 mm
PROMAT
13 mm
151 mm
130 °
Straight shank
DIN 338
W
Please select a product variant to specifically search for it in the shops of our dealers.