- Homepage
- Tools
- Chip removal
- Drill bits
- Twist drills
- Twist drills
- Twist drill PROMAT
Tools
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,01mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,03mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,04mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,04mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,04mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,06mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,06mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,07mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,07mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,07mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,07mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,09mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,09mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,14mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,14mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,15mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,15mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,15mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,16mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,16mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,17mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,17mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,17mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,18mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,18mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,19mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,19mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,19mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,19mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,22mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,25mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,03mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,04mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,04mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,04mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,05mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Further technical information: · Feed in steel up to 800 N: 0,07mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,09mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,14mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,14mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,14mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,14mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,15mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,15mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,15mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,15mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,15mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,16mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,16mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,17mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,17mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,18mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,19mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,19mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,23mm/rev · Quality: Profile-ground · Overall length: Short
Description:
HSS · DIN 338 · Type N · Point angle 118° · Profile-ground · Relieved cone · TiN-coated type with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For all standard drilling operations in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,24mm/rev · Quality: Profile-ground · Overall length: Short
Coating
Cutting material
Length of spiral
Marker
Nominal Ø
Overall length
Point angle
Shank design
Standard
Type
Download
4000860409
Uncoated
HSS
11 mm
PROMAT
0.9 mm
32 mm
118 °
Straight shank
DIN 338
N
4000860410
Uncoated
HSS
12 mm
PROMAT
1 mm
34 mm
118 °
Straight shank
DIN 338
N
4000860411
Uncoated
HSS
14 mm
PROMAT
1.1 mm
36 mm
118 °
Straight shank
DIN 338
N
4000860412
Uncoated
HSS
16 mm
PROMAT
1.2 mm
38 mm
118 °
Straight shank
DIN 338
N
4000860413
Uncoated
HSS
16 mm
PROMAT
1.3 mm
38 mm
118 °
Straight shank
DIN 338
N
4000860416
Uncoated
HSS
20 mm
PROMAT
1.6 mm
43 mm
118 °
Straight shank
DIN 338
N
4000860417
Uncoated
HSS
20 mm
PROMAT
1.7 mm
43 mm
118 °
Straight shank
DIN 338
N
4000860418
Uncoated
HSS
22 mm
PROMAT
1.8 mm
46 mm
118 °
Straight shank
DIN 338
N
4000860422
Uncoated
HSS
27 mm
PROMAT
2.2 mm
53 mm
118 °
Straight shank
DIN 338
N
4000860423
Uncoated
HSS
27 mm
PROMAT
2.3 mm
53 mm
118 °
Straight shank
DIN 338
N
4000860426
Uncoated
HSS
30 mm
PROMAT
2.6 mm
57 mm
118 °
Straight shank
DIN 338
N
4000860427
Uncoated
HSS
33 mm
PROMAT
2.7 mm
61 mm
118 °
Straight shank
DIN 338
N
4000860428
Uncoated
HSS
33 mm
PROMAT
2.8 mm
61 mm
118 °
Straight shank
DIN 338
N
4000860429
Uncoated
HSS
33 mm
PROMAT
2.9 mm
61 mm
118 °
Straight shank
DIN 338
N
4000860430
Uncoated
HSS
33 mm
PROMAT
3 mm
61 mm
118 °
Straight shank
DIN 338
N
4000860432
Uncoated
HSS
36 mm
PROMAT
3.2 mm
65 mm
118 °
Straight shank
DIN 338
N
4000860433
Uncoated
HSS
36 mm
PROMAT
3.3 mm
65 mm
118 °
Straight shank
DIN 338
N
4000860434
Uncoated
HSS
39 mm
PROMAT
3.4 mm
70 mm
118 °
Straight shank
DIN 338
N
4000860436
Uncoated
HSS
39 mm
PROMAT
3.6 mm
70 mm
118 °
Straight shank
DIN 338
N
4000860439
Uncoated
HSS
43 mm
PROMAT
3.9 mm
75 mm
118 °
Straight shank
DIN 338
N
4000860441
Uncoated
HSS
43 mm
PROMAT
4.1 mm
75 mm
118 °
Straight shank
DIN 338
N
4000860444
Uncoated
HSS
47 mm
PROMAT
4.4 mm
80 mm
118 °
Straight shank
DIN 338
N
4000860447
Uncoated
HSS
47 mm
PROMAT
4.7 mm
80 mm
118 °
Straight shank
DIN 338
N
4000860449
Uncoated
HSS
52 mm
PROMAT
4.9 mm
86 mm
118 °
Straight shank
DIN 338
N
4000860450
Uncoated
HSS
52 mm
PROMAT
5 mm
86 mm
118 °
Straight shank
DIN 338
N
4000860455
Uncoated
HSS
57 mm
PROMAT
5.5 mm
93 mm
118 °
Straight shank
DIN 338
N
4000860457
Uncoated
HSS
57 mm
PROMAT
5.7 mm
93 mm
118 °
Straight shank
DIN 338
N
4000860459
Uncoated
HSS
57 mm
PROMAT
5.9 mm
93 mm
118 °
Straight shank
DIN 338
N
4000860462
Uncoated
HSS
63 mm
PROMAT
6.2 mm
101 mm
118 °
Straight shank
DIN 338
N
4000860463
Uncoated
HSS
63 mm
PROMAT
6.3 mm
101 mm
118 °
Straight shank
DIN 338
N
4000860467
Uncoated
HSS
63 mm
PROMAT
6.7 mm
101 mm
118 °
Straight shank
DIN 338
N
4000860469
Uncoated
HSS
69 mm
PROMAT
6.9 mm
109 mm
118 °
Straight shank
DIN 338
N
4000860471
Uncoated
HSS
69 mm
PROMAT
7.1 mm
109 mm
118 °
Straight shank
DIN 338
N
4000860473
Uncoated
HSS
69 mm
PROMAT
7.3 mm
109 mm
118 °
Straight shank
DIN 338
N
4000860475
Uncoated
HSS
69 mm
PROMAT
7.5 mm
109 mm
118 °
Straight shank
DIN 338
N
4000860477
Uncoated
HSS
75 mm
PROMAT
7.7 mm
117 mm
118 °
Straight shank
DIN 338
N
4000860479
Uncoated
HSS
75 mm
PROMAT
7.9 mm
117 mm
118 °
Straight shank
DIN 338
N
4000860481
Uncoated
HSS
75 mm
PROMAT
8.1 mm
117 mm
118 °
Straight shank
DIN 338
N
4000860484
Uncoated
HSS
75 mm
PROMAT
8.4 mm
117 mm
118 °
Straight shank
DIN 338
N
4000860485
Uncoated
HSS
75 mm
PROMAT
8.5 mm
117 mm
118 °
Straight shank
DIN 338
N
4000860487
Uncoated
HSS
81 mm
PROMAT
8.7 mm
125 mm
118 °
Straight shank
DIN 338
N
4000860489
Uncoated
HSS
81 mm
PROMAT
8.9 mm
125 mm
118 °
Straight shank
DIN 338
N
4000860490
Uncoated
HSS
81 mm
PROMAT
9 mm
125 mm
118 °
Straight shank
DIN 338
N
4000860493
Uncoated
HSS
81 mm
PROMAT
9.3 mm
125 mm
118 °
Straight shank
DIN 338
N
4000860495
Uncoated
HSS
81 mm
PROMAT
9.5 mm
125 mm
118 °
Straight shank
DIN 338
N
4000860496
Uncoated
HSS
87 mm
PROMAT
9.6 mm
133 mm
118 °
Straight shank
DIN 338
N
4000860497
Uncoated
HSS
87 mm
PROMAT
9.7 mm
133 mm
118 °
Straight shank
DIN 338
N
4000860511
Uncoated
HSS
94 mm
PROMAT
11 mm
142 mm
118 °
Straight shank
DIN 338
N
4000860525
Uncoated
HSS
101 mm
PROMAT
12.5 mm
151 mm
118 °
Straight shank
DIN 338
N
4000860540
Uncoated
HSS
108 mm
PROMAT
14 mm
160 mm
118 °
Straight shank
DIN 338
N
4000860560
Uncoated
HSS
120 mm
PROMAT
16 mm
178 mm
118 °
Straight shank
DIN 338
N
4000862112
TiN-coated
HSS
16 mm
PROMAT
1.2 mm
38 mm
118 °
Straight shank
DIN 338
N
4000862115
TiN-coated
HSS
18 mm
PROMAT
1.5 mm
40 mm
118 °
Straight shank
DIN 338
N
4000862116
TiN-coated
HSS
20 mm
PROMAT
1.6 mm
43 mm
118 °
Straight shank
DIN 338
N
4000862117
TiN-coated
HSS
20 mm
PROMAT
1.7 mm
43 mm
118 °
Straight shank
DIN 338
N
4000862118
TiN-coated
HSS
22 mm
PROMAT
1.8 mm
46 mm
118 °
Straight shank
DIN 338
N
4000862119
TiN-coated
HSS
22 mm
PROMAT
1.9 mm
46 mm
118 °
Straight shank
DIN 338
N
4000862126
TiN-coated
HSS
30 mm
PROMAT
2.6 mm
57 mm
118 °
Straight shank
DIN 338
N
4000862130
TiN-coated
HSS
33 mm
PROMAT
3 mm
61 mm
118 °
Straight shank
DIN 338
N
4000862132
TiN-coated
HSS
36 mm
PROMAT
3.2 mm
65 mm
118 °
Straight shank
DIN 338
N
4000862134
TiN-coated
HSS
39 mm
PROMAT
3.4 mm
70 mm
118 °
Straight shank
DIN 338
N
4000862139
TiN-coated
HSS
43 mm
PROMAT
3.9 mm
75 mm
118 °
Straight shank
DIN 338
N
4000862141
TiN-coated
HSS
43 mm
PROMAT
4.1 mm
75 mm
118 °
Straight shank
DIN 338
N
4000862142
TiN-coated
HSS
43 mm
PROMAT
4.2 mm
75 mm
118 °
Straight shank
DIN 338
N
4000862143
TiN-coated
HSS
47 mm
PROMAT
4.3 mm
80 mm
118 °
Straight shank
DIN 338
N
4000862144
TiN-coated
HSS
47 mm
PROMAT
4.4 mm
80 mm
118 °
Straight shank
DIN 338
N
4000862146
TiN-coated
HSS
47 mm
PROMAT
4.6 mm
80 mm
118 °
Straight shank
DIN 338
N
4000862147
TiN-coated
HSS
47 mm
PROMAT
4.7 mm
80 mm
118 °
Straight shank
DIN 338
N
4000862149
TiN-coated
HSS
52 mm
PROMAT
4.9 mm
86 mm
118 °
Straight shank
DIN 338
N
4000862150
TiN-coated
HSS
52 mm
PROMAT
5 mm
86 mm
118 °
Straight shank
DIN 338
N
4000862151
TiN-coated
HSS
52 mm
PROMAT
5.1 mm
86 mm
118 °
Straight shank
DIN 338
N
4000862153
TiN-coated
HSS
52 mm
PROMAT
5.3 mm
86 mm
118 °
Straight shank
DIN 338
N
4000862154
TiN-coated
HSS
57 mm
PROMAT
5.4 mm
93 mm
118 °
Straight shank
DIN 338
N
4000862156
TiN-coated
HSS
57 mm
PROMAT
5.6 mm
93 mm
118 °
Straight shank
DIN 338
N
4000862157
TiN-coated
HSS
57 mm
PROMAT
5.7 mm
93 mm
118 °
Straight shank
DIN 338
N
4000862160
TiN-coated
HSS
57 mm
PROMAT
6 mm
93 mm
118 °
Straight shank
DIN 338
N
4000862162
TiN-coated
HSS
63 mm
PROMAT
6.2 mm
101 mm
118 °
Straight shank
DIN 338
N
4000862167
TiN-coated
HSS
63 mm
PROMAT
6.7 mm
101 mm
118 °
Straight shank
DIN 338
N
4000862168
TiN-coated
HSS
69 mm
PROMAT
6.8 mm
109 mm
118 °
Straight shank
DIN 338
N
4000862169
TiN-coated
HSS
69 mm
PROMAT
6.9 mm
109 mm
118 °
Straight shank
DIN 338
N
4000862170
TiN-coated
HSS
69 mm
PROMAT
7 mm
109 mm
118 °
Straight shank
DIN 338
N
4000862171
TiN-coated
HSS
69 mm
PROMAT
7.1 mm
109 mm
118 °
Straight shank
DIN 338
N
4000862173
TiN-coated
HSS
69 mm
PROMAT
7.3 mm
109 mm
118 °
Straight shank
DIN 338
N
4000862174
TiN-coated
HSS
69 mm
PROMAT
7.4 mm
109 mm
118 °
Straight shank
DIN 338
N
4000862175
TiN-coated
HSS
69 mm
PROMAT
7.5 mm
109 mm
118 °
Straight shank
DIN 338
N
4000862176
TiN-coated
HSS
75 mm
PROMAT
7.6 mm
117 mm
118 °
Straight shank
DIN 338
N
4000862177
TiN-coated
HSS
75 mm
PROMAT
7.7 mm
117 mm
118 °
Straight shank
DIN 338
N
4000862178
TiN-coated
HSS
75 mm
PROMAT
7.8 mm
117 mm
118 °
Straight shank
DIN 338
N
4000862181
TiN-coated
HSS
75 mm
PROMAT
8.1 mm
117 mm
118 °
Straight shank
DIN 338
N
4000862183
TiN-coated
HSS
75 mm
PROMAT
8.3 mm
117 mm
118 °
Straight shank
DIN 338
N
4000862184
TiN-coated
HSS
75 mm
PROMAT
8.4 mm
117 mm
118 °
Straight shank
DIN 338
N
4000862191
TiN-coated
HSS
81 mm
PROMAT
9.1 mm
125 mm
118 °
Straight shank
DIN 338
N
4000862193
TiN-coated
HSS
81 mm
PROMAT
9.3 mm
125 mm
118 °
Straight shank
DIN 338
N
4000862196
TiN-coated
HSS
87 mm
PROMAT
9.6 mm
133 mm
118 °
Straight shank
DIN 338
N
4000862198
TiN-coated
HSS
87 mm
PROMAT
9.8 mm
133 mm
118 °
Straight shank
DIN 338
N
4000862199
TiN-coated
HSS
87 mm
PROMAT
9.9 mm
133 mm
118 °
Straight shank
DIN 338
N
4000862205
TiN-coated
HSS
87 mm
PROMAT
10.5 mm
133 mm
118 °
Straight shank
DIN 338
N
4000862225
TiN-coated
HSS
101 mm
PROMAT
12.5 mm
151 mm
118 °
Straight shank
DIN 338
N
4000862245
TiN-coated
HSS
114 mm
PROMAT
14.5 mm
169 mm
118 °
Straight shank
DIN 338
N
4000862250
TiN-coated
HSS
114 mm
PROMAT
15 mm
169 mm
118 °
Straight shank
DIN 338
N
Please select a product variant to specifically search for it in the shops of our dealers.