- Homepage
- Tools
- Chip removal
- Drill bits
- Twist drills
- Twist drills
- Twist drill PROMAT
Tools
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,02mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,02mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,03mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,03mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,03mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,03mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,03mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,03mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,04mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,04mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,04mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,04mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,05mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,05mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,05mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,07mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,07mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,09mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,09mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground
Description:
HSS-Co5 · DIN 340 · Type N · Point angle 130° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes as well as for drilling steel, cast iron, rust- and acid-resistant steels greater than 800 N/mm² in strength Industrial quality Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground
Coating
Cutting material
Length of spiral
Marker
Nominal Ø
Overall length
Point angle
Shank design
Standard
Type
Download
4000862261
Uncoated
HSS-Co
56 mm
PROMAT
2 mm
85 mm
130 °
Straight shank
DIN 340
N
4000862262
Uncoated
HSS-Co
62 mm
PROMAT
2.5 mm
95 mm
130 °
Straight shank
DIN 340
N
4000862263
Uncoated
HSS-Co
66 mm
PROMAT
3 mm
100 mm
130 °
Straight shank
DIN 340
N
4000862264
Uncoated
HSS-Co
69 mm
PROMAT
3.1 mm
106 mm
130 °
Straight shank
DIN 340
N
4000862265
Uncoated
HSS-Co
69 mm
PROMAT
3.2 mm
106 mm
130 °
Straight shank
DIN 340
N
4000862266
Uncoated
HSS-Co
69 mm
PROMAT
3.3 mm
106 mm
130 °
Straight shank
DIN 340
N
4000862267
Uncoated
HSS-Co
73 mm
PROMAT
3.5 mm
112 mm
130 °
Straight shank
DIN 340
N
4000862268
Uncoated
HSS-Co
78 mm
PROMAT
3.8 mm
119 mm
130 °
Straight shank
DIN 340
N
4000862269
Uncoated
HSS-Co
78 mm
PROMAT
4 mm
119 mm
130 °
Straight shank
DIN 340
N
4000862270
Uncoated
HSS-Co
78 mm
PROMAT
4.1 mm
119 mm
130 °
Straight shank
DIN 340
N
4000862271
Uncoated
HSS-Co
78 mm
PROMAT
4.2 mm
119 mm
130 °
Straight shank
DIN 340
N
4000862272
Uncoated
HSS-Co
82 mm
PROMAT
4.5 mm
126 mm
130 °
Straight shank
DIN 340
N
4000862273
Uncoated
HSS-Co
87 mm
PROMAT
5 mm
132 mm
130 °
Straight shank
DIN 340
N
4000862274
Uncoated
HSS-Co
87 mm
PROMAT
5.2 mm
132 mm
130 °
Straight shank
DIN 340
N
4000862275
Uncoated
HSS-Co
91 mm
PROMAT
5.5 mm
139 mm
130 °
Straight shank
DIN 340
N
4000862276
Uncoated
HSS-Co
91 mm
PROMAT
6 mm
139 mm
130 °
Straight shank
DIN 340
N
4000862277
Uncoated
HSS-Co
97 mm
PROMAT
6.5 mm
148 mm
130 °
Straight shank
DIN 340
N
4000862278
Uncoated
HSS-Co
102 mm
PROMAT
6.8 mm
156 mm
130 °
Straight shank
DIN 340
N
4000862279
Uncoated
HSS-Co
102 mm
PROMAT
7 mm
156 mm
130 °
Straight shank
DIN 340
N
4000862280
Uncoated
HSS-Co
102 mm
PROMAT
7.5 mm
156 mm
130 °
Straight shank
DIN 340
N
4000862281
Uncoated
HSS-Co
109 mm
PROMAT
8 mm
165 mm
130 °
Straight shank
DIN 340
N
4000862282
Uncoated
HSS-Co
109 mm
PROMAT
8.5 mm
165 mm
130 °
Straight shank
DIN 340
N
4000862283
Uncoated
HSS-Co
115 mm
PROMAT
9 mm
175 mm
130 °
Straight shank
DIN 340
N
4000862284
Uncoated
HSS-Co
115 mm
PROMAT
9.5 mm
175 mm
130 °
Straight shank
DIN 340
N
4000862285
Uncoated
HSS-Co
121 mm
PROMAT
10 mm
184 mm
130 °
Straight shank
DIN 340
N
4000862286
Uncoated
HSS-Co
121 mm
PROMAT
10.2 mm
184 mm
130 °
Straight shank
DIN 340
N
4000862287
Uncoated
HSS-Co
121 mm
PROMAT
10.5 mm
184 mm
130 °
Straight shank
DIN 340
N
4000862288
Uncoated
HSS-Co
128 mm
PROMAT
11 mm
195 mm
130 °
Straight shank
DIN 340
N
4000862289
Uncoated
HSS-Co
128 mm
PROMAT
11.5 mm
195 mm
130 °
Straight shank
DIN 340
N
4000862290
Uncoated
HSS-Co
134 mm
PROMAT
12 mm
205 mm
130 °
Straight shank
DIN 340
N
4000862291
Uncoated
HSS-Co
134 mm
PROMAT
12.5 mm
205 mm
130 °
Straight shank
DIN 340
N
4000862292
Uncoated
HSS-Co
134 mm
PROMAT
13 mm
205 mm
130 °
Straight shank
DIN 340
N
Please select a product variant to specifically search for it in the shops of our dealers.
Search dealer
Your location
Filter
