- Homepage
- Tools
- Chip removal
- Drill bits
- Twist drills
- Twist drills
- Twist drill PROMAT
Tools
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,03mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,05mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,05mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,06mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,06mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,06mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,06mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,07mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,07mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,07mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,07mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,09mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,09mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,09mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,09mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,14mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,14mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,14mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,14mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,15mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,15mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,16mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,16mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,17mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,18mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,19mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,19mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,22mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,24mm/rev · Quality: Profile-ground · Overall length: Long
Description:
HSS · DIN 340 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · For deep holes and for drilling using drill bushes in steel and cast iron Industrial quality Further technical information: · Feed in steel up to 800 N: 0,21mm/rev · Quality: Profile-ground · Overall length: Long
Coating
Cutting material
Length of spiral
Marker
Nominal Ø
Overall length
Point angle
Shank design
Standard
Type
Download
4000861005
Uncoated
HSS
12 mm
PROMAT
0.5 mm
32 mm
118 °
Straight shank
DIN 340
N
4000861010
Uncoated
HSS
33 mm
PROMAT
1 mm
56 mm
118 °
Straight shank
DIN 340
N
4000861015
Uncoated
HSS
45 mm
PROMAT
1.5 mm
70 mm
118 °
Straight shank
DIN 340
N
4000861020
Uncoated
HSS
56 mm
PROMAT
2 mm
85 mm
118 °
Straight shank
DIN 340
N
4000861021
Uncoated
HSS
56 mm
PROMAT
2.1 mm
85 mm
118 °
Straight shank
DIN 340
N
4000861022
Uncoated
HSS
59 mm
PROMAT
2.2 mm
90 mm
118 °
Straight shank
DIN 340
N
4000861023
Uncoated
HSS
59 mm
PROMAT
2.3 mm
90 mm
118 °
Straight shank
DIN 340
N
4000861024
Uncoated
HSS
62 mm
PROMAT
2.4 mm
95 mm
118 °
Straight shank
DIN 340
N
4000861025
Uncoated
HSS
62 mm
PROMAT
2.5 mm
95 mm
118 °
Straight shank
DIN 340
N
4000861026
Uncoated
HSS
62 mm
PROMAT
2.6 mm
95 mm
118 °
Straight shank
DIN 340
N
4000861027
Uncoated
HSS
66 mm
PROMAT
2.7 mm
100 mm
118 °
Straight shank
DIN 340
N
4000861028
Uncoated
HSS
66 mm
PROMAT
2.8 mm
100 mm
118 °
Straight shank
DIN 340
N
4000861029
Uncoated
HSS
66 mm
PROMAT
2.9 mm
100 mm
118 °
Straight shank
DIN 340
N
4000861030
Uncoated
HSS
66 mm
PROMAT
3 mm
100 mm
118 °
Straight shank
DIN 340
N
4000861031
Uncoated
HSS
69 mm
PROMAT
3.1 mm
106 mm
118 °
Straight shank
DIN 340
N
4000861032
Uncoated
HSS
69 mm
PROMAT
3.2 mm
106 mm
118 °
Straight shank
DIN 340
N
4000861033
Uncoated
HSS
69 mm
PROMAT
3.3 mm
106 mm
118 °
Straight shank
DIN 340
N
4000861034
Uncoated
HSS
73 mm
PROMAT
3.4 mm
112 mm
118 °
Straight shank
DIN 340
N
4000861035
Uncoated
HSS
73 mm
PROMAT
3.5 mm
112 mm
118 °
Straight shank
DIN 340
N
4000861036
Uncoated
HSS
73 mm
PROMAT
3.6 mm
112 mm
118 °
Straight shank
DIN 340
N
4000861037
Uncoated
HSS
73 mm
PROMAT
3.7 mm
112 mm
118 °
Straight shank
DIN 340
N
4000861038
Uncoated
HSS
78 mm
PROMAT
3.8 mm
119 mm
118 °
Straight shank
DIN 340
N
4000861039
Uncoated
HSS
78 mm
PROMAT
3.9 mm
119 mm
118 °
Straight shank
DIN 340
N
4000861040
Uncoated
HSS
78 mm
PROMAT
4 mm
119 mm
118 °
Straight shank
DIN 340
N
4000861041
Uncoated
HSS
78 mm
PROMAT
4.1 mm
119 mm
118 °
Straight shank
DIN 340
N
4000861042
Uncoated
HSS
78 mm
PROMAT
4.2 mm
119 mm
118 °
Straight shank
DIN 340
N
4000861043
Uncoated
HSS
82 mm
PROMAT
4.3 mm
126 mm
118 °
Straight shank
DIN 340
N
4000861044
Uncoated
HSS
82 mm
PROMAT
4.4 mm
126 mm
118 °
Straight shank
DIN 340
N
4000861045
Uncoated
HSS
82 mm
PROMAT
4.5 mm
126 mm
118 °
Straight shank
DIN 340
N
4000861046
Uncoated
HSS
82 mm
PROMAT
4.6 mm
126 mm
118 °
Straight shank
DIN 340
N
4000861047
Uncoated
HSS
82 mm
PROMAT
4.7 mm
126 mm
118 °
Straight shank
DIN 340
N
4000861048
Uncoated
HSS
87 mm
PROMAT
4.8 mm
132 mm
118 °
Straight shank
DIN 340
N
4000861049
Uncoated
HSS
87 mm
PROMAT
4.9 mm
132 mm
118 °
Straight shank
DIN 340
N
4000861050
Uncoated
HSS
87 mm
PROMAT
5 mm
132 mm
118 °
Straight shank
DIN 340
N
4000861051
Uncoated
HSS
87 mm
PROMAT
5.1 mm
132 mm
118 °
Straight shank
DIN 340
N
4000861052
Uncoated
HSS
87 mm
PROMAT
5.2 mm
132 mm
118 °
Straight shank
DIN 340
N
4000861053
Uncoated
HSS
87 mm
PROMAT
5.3 mm
132 mm
118 °
Straight shank
DIN 340
N
4000861054
Uncoated
HSS
91 mm
PROMAT
5.4 mm
139 mm
118 °
Straight shank
DIN 340
N
4000861055
Uncoated
HSS
91 mm
PROMAT
5.5 mm
139 mm
118 °
Straight shank
DIN 340
N
4000861056
Uncoated
HSS
91 mm
PROMAT
5.6 mm
139 mm
118 °
Straight shank
DIN 340
N
4000861057
Uncoated
HSS
91 mm
PROMAT
5.7 mm
139 mm
118 °
Straight shank
DIN 340
N
4000861058
Uncoated
HSS
91 mm
PROMAT
5.8 mm
139 mm
118 °
Straight shank
DIN 340
N
4000861059
Uncoated
HSS
91 mm
PROMAT
5.9 mm
139 mm
118 °
Straight shank
DIN 340
N
4000861060
Uncoated
HSS
91 mm
PROMAT
6 mm
139 mm
118 °
Straight shank
DIN 340
N
4000861061
Uncoated
HSS
97 mm
PROMAT
6.1 mm
148 mm
118 °
Straight shank
DIN 340
N
4000861062
Uncoated
HSS
97 mm
PROMAT
6.2 mm
148 mm
118 °
Straight shank
DIN 340
N
4000861063
Uncoated
HSS
97 mm
PROMAT
6.3 mm
148 mm
118 °
Straight shank
DIN 340
N
4000861064
Uncoated
HSS
97 mm
PROMAT
6.4 mm
148 mm
118 °
Straight shank
DIN 340
N
4000861065
Uncoated
HSS
97 mm
PROMAT
6.5 mm
148 mm
118 °
Straight shank
DIN 340
N
4000861066
Uncoated
HSS
97 mm
PROMAT
6.6 mm
148 mm
118 °
Straight shank
DIN 340
N
4000861067
Uncoated
HSS
97 mm
PROMAT
6.7 mm
148 mm
118 °
Straight shank
DIN 340
N
4000861068
Uncoated
HSS
102 mm
PROMAT
6.8 mm
156 mm
118 °
Straight shank
DIN 340
N
4000861069
Uncoated
HSS
102 mm
PROMAT
6.9 mm
156 mm
118 °
Straight shank
DIN 340
N
4000861070
Uncoated
HSS
102 mm
PROMAT
7 mm
156 mm
118 °
Straight shank
DIN 340
N
4000861072
Uncoated
HSS
102 mm
PROMAT
7.2 mm
156 mm
118 °
Straight shank
DIN 340
N
4000861075
Uncoated
HSS
102 mm
PROMAT
7.5 mm
156 mm
118 °
Straight shank
DIN 340
N
4000861078
Uncoated
HSS
109 mm
PROMAT
7.8 mm
165 mm
118 °
Straight shank
DIN 340
N
4000861080
Uncoated
HSS
109 mm
PROMAT
8 mm
165 mm
118 °
Straight shank
DIN 340
N
4000861082
Uncoated
HSS
109 mm
PROMAT
8.2 mm
165 mm
118 °
Straight shank
DIN 340
N
4000861085
Uncoated
HSS
109 mm
PROMAT
8.5 mm
165 mm
118 °
Straight shank
DIN 340
N
4000861090
Uncoated
HSS
115 mm
PROMAT
9 mm
175 mm
118 °
Straight shank
DIN 340
N
4000861095
Uncoated
HSS
115 mm
PROMAT
9.5 mm
175 mm
118 °
Straight shank
DIN 340
N
4000861098
Uncoated
HSS
121 mm
PROMAT
9.8 mm
184 mm
118 °
Straight shank
DIN 340
N
4000861100
Uncoated
HSS
121 mm
PROMAT
10 mm
184 mm
118 °
Straight shank
DIN 340
N
4000861102
Uncoated
HSS
121 mm
PROMAT
10.2 mm
184 mm
118 °
Straight shank
DIN 340
N
4000861105
Uncoated
HSS
121 mm
PROMAT
10.5 mm
184 mm
118 °
Straight shank
DIN 340
N
4000861110
Uncoated
HSS
128 mm
PROMAT
11 mm
195 mm
118 °
Straight shank
DIN 340
N
4000861115
Uncoated
HSS
128 mm
PROMAT
11.5 mm
195 mm
118 °
Straight shank
DIN 340
N
4000861120
Uncoated
HSS
134 mm
PROMAT
12 mm
205 mm
118 °
Straight shank
DIN 340
N
4000861125
Uncoated
HSS
134 mm
PROMAT
12.5 mm
205 mm
118 °
Straight shank
DIN 340
N
4000861128
Uncoated
HSS
140 mm
PROMAT
14 mm
214 mm
118 °
Straight shank
DIN 340
N
4000861129
Uncoated
HSS
144 mm
PROMAT
15 mm
220 mm
118 °
Straight shank
DIN 340
N
4000861130
Uncoated
HSS
134 mm
PROMAT
13 mm
205 mm
118 °
Straight shank
DIN 340
N
Please select a product variant to specifically search for it in the shops of our dealers.