- Homepage
- Tools
- Chip removal
- Drill bits
- Twist drills
- Twist drills
- Twist drill PROMAT
Tools
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,04mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,06mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,08mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,1mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,11mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,12mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,13mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,14mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,14mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,14mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,14mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,15mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,15mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,15mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,16mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,17mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,18mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,19mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,2mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,21mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,23mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,24mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,25mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,25mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,25mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,25mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,25mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,25mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,26mm/rev · Quality: Profile-ground · Overall length: Extra-short
Description:
HSS · DIN 1897 · Type N · Point angle 118° · Profile ground with crosswise grinding from Ø 3.0 mm · With straight shank · Right-hand cutting · Drill bits with very stable short design for high load · For use on machines and hand-held drilling machines Industrial quality Further technical information: · Feed in steel up to 800 N: 0,25mm/rev · Quality: Profile-ground · Overall length: Extra-short
Coating
Cutting material
Length of spiral
Marker
Nominal Ø
Overall length
Point angle
Shank design
Standard
Type
Download
4000860010
Uncoated
HSS
6 mm
PROMAT
1 mm
26 mm
118 °
Straight shank
DIN 1897
N
4000860015
Uncoated
HSS
9 mm
PROMAT
1.5 mm
32 mm
118 °
Straight shank
DIN 1897
N
4000860020
Uncoated
HSS
12 mm
PROMAT
2 mm
38 mm
118 °
Straight shank
DIN 1897
N
4000860025
Uncoated
HSS
14 mm
PROMAT
2.5 mm
43 mm
118 °
Straight shank
DIN 1897
N
4000860030
Uncoated
HSS
16 mm
PROMAT
3 mm
46 mm
118 °
Straight shank
DIN 1897
N
4000860031
Uncoated
HSS
18 mm
PROMAT
3.1 mm
49 mm
118 °
Straight shank
DIN 1897
N
4000860032
Uncoated
HSS
18 mm
PROMAT
3.2 mm
49 mm
118 °
Straight shank
DIN 1897
N
4000860033
Uncoated
HSS
18 mm
PROMAT
3.3 mm
49 mm
118 °
Straight shank
DIN 1897
N
4000860034
Uncoated
HSS
20 mm
PROMAT
3.4 mm
52 mm
118 °
Straight shank
DIN 1897
N
4000860035
Uncoated
HSS
20 mm
PROMAT
3.5 mm
52 mm
118 °
Straight shank
DIN 1897
N
4000860036
Uncoated
HSS
20 mm
PROMAT
3.6 mm
52 mm
118 °
Straight shank
DIN 1897
N
4000860037
Uncoated
HSS
20 mm
PROMAT
3.7 mm
52 mm
118 °
Straight shank
DIN 1897
N
4000860038
Uncoated
HSS
22 mm
PROMAT
3.8 mm
55 mm
118 °
Straight shank
DIN 1897
N
4000860039
Uncoated
HSS
22 mm
PROMAT
3.9 mm
55 mm
118 °
Straight shank
DIN 1897
N
4000860040
Uncoated
HSS
22 mm
PROMAT
4 mm
55 mm
118 °
Straight shank
DIN 1897
N
4000860041
Uncoated
HSS
22 mm
PROMAT
4.1 mm
55 mm
118 °
Straight shank
DIN 1897
N
4000860042
Uncoated
HSS
22 mm
PROMAT
4.2 mm
55 mm
118 °
Straight shank
DIN 1897
N
4000860043
Uncoated
HSS
24 mm
PROMAT
4.3 mm
58 mm
118 °
Straight shank
DIN 1897
N
4000860044
Uncoated
HSS
24 mm
PROMAT
4.4 mm
58 mm
118 °
Straight shank
DIN 1897
N
4000860045
Uncoated
HSS
24 mm
PROMAT
4.5 mm
58 mm
118 °
Straight shank
DIN 1897
N
4000860046
Uncoated
HSS
24 mm
PROMAT
4.6 mm
58 mm
118 °
Straight shank
DIN 1897
N
4000860047
Uncoated
HSS
24 mm
PROMAT
4.7 mm
58 mm
118 °
Straight shank
DIN 1897
N
4000860048
Uncoated
HSS
26 mm
PROMAT
4.8 mm
62 mm
118 °
Straight shank
DIN 1897
N
4000860049
Uncoated
HSS
26 mm
PROMAT
4.9 mm
62 mm
118 °
Straight shank
DIN 1897
N
4000860050
Uncoated
HSS
26 mm
PROMAT
5 mm
62 mm
118 °
Straight shank
DIN 1897
N
4000860051
Uncoated
HSS
26 mm
PROMAT
5.1 mm
62 mm
118 °
Straight shank
DIN 1897
N
4000860052
Uncoated
HSS
26 mm
PROMAT
5.2 mm
62 mm
118 °
Straight shank
DIN 1897
N
4000860053
Uncoated
HSS
26 mm
PROMAT
5.3 mm
62 mm
118 °
Straight shank
DIN 1897
N
4000860054
Uncoated
HSS
28 mm
PROMAT
5.4 mm
66 mm
118 °
Straight shank
DIN 1897
N
4000860055
Uncoated
HSS
28 mm
PROMAT
5.5 mm
66 mm
118 °
Straight shank
DIN 1897
N
4000860056
Uncoated
HSS
28 mm
PROMAT
5.6 mm
66 mm
118 °
Straight shank
DIN 1897
N
4000860057
Uncoated
HSS
28 mm
PROMAT
5.7 mm
66 mm
118 °
Straight shank
DIN 1897
N
4000860058
Uncoated
HSS
28 mm
PROMAT
5.8 mm
66 mm
118 °
Straight shank
DIN 1897
N
4000860059
Uncoated
HSS
28 mm
PROMAT
5.9 mm
66 mm
118 °
Straight shank
DIN 1897
N
4000860060
Uncoated
HSS
28 mm
PROMAT
6 mm
66 mm
118 °
Straight shank
DIN 1897
N
4000860065
Uncoated
HSS
31 mm
PROMAT
6.5 mm
70 mm
118 °
Straight shank
DIN 1897
N
4000860068
Uncoated
HSS
34 mm
PROMAT
6.8 mm
74 mm
118 °
Straight shank
DIN 1897
N
4000860070
Uncoated
HSS
34 mm
PROMAT
7 mm
74 mm
118 °
Straight shank
DIN 1897
N
4000860075
Uncoated
HSS
34 mm
PROMAT
7.5 mm
74 mm
118 °
Straight shank
DIN 1897
N
4000860080
Uncoated
HSS
37 mm
PROMAT
8 mm
79 mm
118 °
Straight shank
DIN 1897
N
4000860087
Uncoated
HSS
37 mm
PROMAT
8.5 mm
79 mm
118 °
Straight shank
DIN 1897
N
4000860091
Uncoated
HSS
40 mm
PROMAT
9 mm
84 mm
118 °
Straight shank
DIN 1897
N
4000860095
Uncoated
HSS
40 mm
PROMAT
9.5 mm
84 mm
118 °
Straight shank
DIN 1897
N
4000860200
Uncoated
HSS
43 mm
PROMAT
10 mm
89 mm
118 °
Straight shank
DIN 1897
N
4000860201
Uncoated
HSS
43 mm
PROMAT
10.5 mm
89 mm
118 °
Straight shank
DIN 1897
N
4000860202
Uncoated
HSS
47 mm
PROMAT
11 mm
95 mm
118 °
Straight shank
DIN 1897
N
4000860203
Uncoated
HSS
47 mm
PROMAT
11.5 mm
95 mm
118 °
Straight shank
DIN 1897
N
4000860204
Uncoated
HSS
51 mm
PROMAT
12 mm
102 mm
118 °
Straight shank
DIN 1897
N
4000860205
Uncoated
HSS
51 mm
PROMAT
12.5 mm
102 mm
118 °
Straight shank
DIN 1897
N
4000860206
Uncoated
HSS
51 mm
PROMAT
13 mm
102 mm
118 °
Straight shank
DIN 1897
N
4000860207
Uncoated
HSS
43 mm
PROMAT
10.2 mm
89 mm
118 °
Straight shank
DIN 1897
N
Please select a product variant to specifically search for it in the shops of our dealers.