- Homepage
- Tools
- Chip removal
- Drill bits
- Twist drills
- Twist drills
- Twist drill PROMAT
Tools
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,11mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,13mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,15mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,16mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,16mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,16mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,05mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,05mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,07mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,07mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,09mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,09mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,11mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,13mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,13mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,15mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,15mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,15mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,16mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,16mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,17mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,17mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,17mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,18mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,18mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,18mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,19mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,07mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,09mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,09mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,05mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,09mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,11mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,16mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,19mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,05mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,07mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,11mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,16mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,17mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Description:
Solid carbide · DIN 338 · Type N · Point angle 118° · With split point · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h8 · Overall length: Short
Coating
Cutting material
Length of spiral
Marker
Nominal Ø
Overall length
Point angle
Shank design
Standard
Type
Download
4000860561
TiAlN-coated
Solid carbide
47 mm
PROMAT
4.4 mm
80 mm
118 °
DIN 6535 HA
DIN 338
N
4000860562
TiAlN-coated
Solid carbide
47 mm
PROMAT
4.6 mm
80 mm
118 °
DIN 6535 HA
DIN 338
N
4000860563
TiAlN-coated
Solid carbide
47 mm
PROMAT
4.7 mm
80 mm
118 °
DIN 6535 HA
DIN 338
N
4000860564
TiAlN-coated
Solid carbide
52 mm
PROMAT
4.9 mm
86 mm
118 °
DIN 6535 HA
DIN 338
N
4000860565
TiAlN-coated
Solid carbide
52 mm
PROMAT
5.1 mm
86 mm
118 °
DIN 6535 HA
DIN 338
N
4000860570
TiAlN-coated
Solid carbide
57 mm
PROMAT
5.7 mm
93 mm
118 °
DIN 6535 HA
DIN 338
N
4000860572
TiAlN-coated
Solid carbide
57 mm
PROMAT
5.9 mm
93 mm
118 °
DIN 6535 HA
DIN 338
N
4000860574
TiAlN-coated
Solid carbide
63 mm
PROMAT
6.2 mm
101 mm
118 °
DIN 6535 HA
DIN 338
N
4000860575
TiAlN-coated
Solid carbide
63 mm
PROMAT
6.3 mm
101 mm
118 °
DIN 6535 HA
DIN 338
N
4000860576
TiAlN-coated
Solid carbide
63 mm
PROMAT
6.4 mm
101 mm
118 °
DIN 6535 HA
DIN 338
N
4000860578
TiAlN-coated
Solid carbide
63 mm
PROMAT
6.7 mm
101 mm
118 °
DIN 6535 HA
DIN 338
N
4000860581
TiAlN-coated
Solid carbide
69 mm
PROMAT
7.2 mm
109 mm
118 °
DIN 6535 HA
DIN 338
N
4000860582
TiAlN-coated
Solid carbide
69 mm
PROMAT
7.3 mm
109 mm
118 °
DIN 6535 HA
DIN 338
N
4000860583
TiAlN-coated
Solid carbide
69 mm
PROMAT
7.4 mm
109 mm
118 °
DIN 6535 HA
DIN 338
N
4000860585
TiAlN-coated
Solid carbide
75 mm
PROMAT
7.7 mm
117 mm
118 °
DIN 6535 HA
DIN 338
N
4000860588
TiAlN-coated
Solid carbide
75 mm
PROMAT
8.1 mm
117 mm
118 °
DIN 6535 HA
DIN 338
N
4000860589
TiAlN-coated
Solid carbide
75 mm
PROMAT
8.2 mm
117 mm
118 °
DIN 6535 HA
DIN 338
N
4000860591
TiAlN-coated
Solid carbide
75 mm
PROMAT
8.4 mm
117 mm
118 °
DIN 6535 HA
DIN 338
N
4000860604
TiAlN-coated
Solid carbide
94 mm
PROMAT
10.8 mm
142 mm
118 °
DIN 6535 HA
DIN 338
N
4000860605
TiAlN-coated
Solid carbide
94 mm
PROMAT
11.5 mm
142 mm
118 °
DIN 6535 HA
DIN 338
N
4000860888
Uncoated
Solid carbide
27 mm
PROMAT
2.3 mm
53 mm
118 °
DIN 6535 HA
DIN 338
N
4000860889
Uncoated
Solid carbide
30 mm
PROMAT
2.4 mm
57 mm
118 °
DIN 6535 HA
DIN 338
N
4000860890
Uncoated
Solid carbide
30 mm
PROMAT
2.6 mm
57 mm
118 °
DIN 6535 HA
DIN 338
N
4000860893
Uncoated
Solid carbide
36 mm
PROMAT
3.1 mm
65 mm
118 °
DIN 6535 HA
DIN 338
N
4000860894
Uncoated
Solid carbide
36 mm
PROMAT
3.2 mm
65 mm
118 °
DIN 6535 HA
DIN 338
N
4000860895
Uncoated
Solid carbide
39 mm
PROMAT
3.4 mm
70 mm
118 °
DIN 6535 HA
DIN 338
N
4000860896
Uncoated
Solid carbide
39 mm
PROMAT
3.6 mm
70 mm
118 °
DIN 6535 HA
DIN 338
N
4000860897
Uncoated
Solid carbide
39 mm
PROMAT
3.7 mm
70 mm
118 °
DIN 6535 HA
DIN 338
N
4000860901
Uncoated
Solid carbide
47 mm
PROMAT
4.4 mm
80 mm
118 °
DIN 6535 HA
DIN 338
N
4000860903
Uncoated
Solid carbide
47 mm
PROMAT
4.6 mm
80 mm
118 °
DIN 6535 HA
DIN 338
N
4000860905
Uncoated
Solid carbide
47 mm
PROMAT
4.7 mm
80 mm
118 °
DIN 6535 HA
DIN 338
N
4000860907
Uncoated
Solid carbide
52 mm
PROMAT
4.9 mm
86 mm
118 °
DIN 6535 HA
DIN 338
N
4000860911
Uncoated
Solid carbide
52 mm
PROMAT
5.2 mm
86 mm
118 °
DIN 6535 HA
DIN 338
N
4000860913
Uncoated
Solid carbide
52 mm
PROMAT
5.3 mm
86 mm
118 °
DIN 6535 HA
DIN 338
N
4000860919
Uncoated
Solid carbide
57 mm
PROMAT
5.7 mm
93 mm
118 °
DIN 6535 HA
DIN 338
N
4000860921
Uncoated
Solid carbide
57 mm
PROMAT
5.9 mm
93 mm
118 °
DIN 6535 HA
DIN 338
N
4000860925
Uncoated
Solid carbide
63 mm
PROMAT
6.2 mm
101 mm
118 °
DIN 6535 HA
DIN 338
N
4000860927
Uncoated
Solid carbide
63 mm
PROMAT
6.3 mm
101 mm
118 °
DIN 6535 HA
DIN 338
N
4000860929
Uncoated
Solid carbide
63 mm
PROMAT
6.4 mm
101 mm
118 °
DIN 6535 HA
DIN 338
N
4000860931
Uncoated
Solid carbide
63 mm
PROMAT
6.6 mm
101 mm
118 °
DIN 6535 HA
DIN 338
N
4000860933
Uncoated
Solid carbide
63 mm
PROMAT
6.7 mm
101 mm
118 °
DIN 6535 HA
DIN 338
N
4000860935
Uncoated
Solid carbide
69 mm
PROMAT
6.9 mm
109 mm
118 °
DIN 6535 HA
DIN 338
N
4000860937
Uncoated
Solid carbide
69 mm
PROMAT
7.1 mm
109 mm
118 °
DIN 6535 HA
DIN 338
N
4000860939
Uncoated
Solid carbide
69 mm
PROMAT
7.2 mm
109 mm
118 °
DIN 6535 HA
DIN 338
N
4000860941
Uncoated
Solid carbide
69 mm
PROMAT
7.3 mm
109 mm
118 °
DIN 6535 HA
DIN 338
N
4000860947
Uncoated
Solid carbide
75 mm
PROMAT
7.7 mm
117 mm
118 °
DIN 6535 HA
DIN 338
N
4000860949
Uncoated
Solid carbide
75 mm
PROMAT
7.8 mm
117 mm
118 °
DIN 6535 HA
DIN 338
N
4000860950
Uncoated
Solid carbide
75 mm
PROMAT
7.9 mm
117 mm
118 °
DIN 6535 HA
DIN 338
N
4000860951
Uncoated
Solid carbide
75 mm
PROMAT
8.1 mm
117 mm
118 °
DIN 6535 HA
DIN 338
N
4000860953
Uncoated
Solid carbide
75 mm
PROMAT
8.2 mm
117 mm
118 °
DIN 6535 HA
DIN 338
N
4000860959
Uncoated
Solid carbide
81 mm
PROMAT
8.6 mm
125 mm
118 °
DIN 6535 HA
DIN 338
N
4000860961
Uncoated
Solid carbide
81 mm
PROMAT
8.7 mm
125 mm
118 °
DIN 6535 HA
DIN 338
N
4000860965
Uncoated
Solid carbide
81 mm
PROMAT
8.9 mm
125 mm
118 °
DIN 6535 HA
DIN 338
N
4000860967
Uncoated
Solid carbide
81 mm
PROMAT
9.1 mm
125 mm
118 °
DIN 6535 HA
DIN 338
N
4000860971
Uncoated
Solid carbide
81 mm
PROMAT
9.3 mm
125 mm
118 °
DIN 6535 HA
DIN 338
N
4000860973
Uncoated
Solid carbide
81 mm
PROMAT
9.4 mm
125 mm
118 °
DIN 6535 HA
DIN 338
N
4000860975
Uncoated
Solid carbide
87 mm
PROMAT
9.6 mm
133 mm
118 °
DIN 6535 HA
DIN 338
N
4000860979
Uncoated
Solid carbide
87 mm
PROMAT
9.9 mm
133 mm
118 °
DIN 6535 HA
DIN 338
N
4000860981
Uncoated
Solid carbide
94 mm
PROMAT
10.8 mm
142 mm
118 °
DIN 6535 HA
DIN 338
N
4000860983
Uncoated
Solid carbide
94 mm
PROMAT
11.5 mm
142 mm
118 °
DIN 6535 HA
DIN 338
N
4000860987
Uncoated
Solid carbide
101 mm
PROMAT
13 mm
151 mm
118 °
DIN 6535 HA
DIN 338
N
4000860997
TiAlN-coated
Solid carbide
30 mm
PROMAT
2.6 mm
57 mm
118 °
DIN 6535 HA
DIN 338
N
4000860999
TiAlN-coated
Solid carbide
33 mm
PROMAT
2.7 mm
61 mm
118 °
DIN 6535 HA
DIN 338
N
4000861002
TiAlN-coated
Solid carbide
36 mm
PROMAT
3.2 mm
65 mm
118 °
DIN 6535 HA
DIN 338
N
4000861004
TiAlN-coated
Solid carbide
39 mm
PROMAT
3.6 mm
70 mm
118 °
DIN 6535 HA
DIN 338
N
4000861006
TiAlN-coated
Solid carbide
39 mm
PROMAT
3.7 mm
70 mm
118 °
DIN 6535 HA
DIN 338
N
4000861007
TiAlN-coated
Solid carbide
43 mm
PROMAT
3.9 mm
75 mm
118 °
DIN 6535 HA
DIN 338
N
4000861008
TiAlN-coated
Solid carbide
43 mm
PROMAT
4.1 mm
75 mm
118 °
DIN 6535 HA
DIN 338
N
4000861202
Uncoated
Solid carbide
24 mm
PROMAT
2 mm
49 mm
118 °
DIN 6535 HA
DIN 338
N
4000861204
Uncoated
Solid carbide
30 mm
PROMAT
2.5 mm
57 mm
118 °
DIN 6535 HA
DIN 338
N
4000861206
Uncoated
Solid carbide
33 mm
PROMAT
3 mm
61 mm
118 °
DIN 6535 HA
DIN 338
N
4000861208
Uncoated
Solid carbide
36 mm
PROMAT
3.3 mm
65 mm
118 °
DIN 6535 HA
DIN 338
N
4000861210
Uncoated
Solid carbide
39 mm
PROMAT
3.5 mm
70 mm
118 °
DIN 6535 HA
DIN 338
N
4000861212
Uncoated
Solid carbide
43 mm
PROMAT
4 mm
75 mm
118 °
DIN 6535 HA
DIN 338
N
4000861216
Uncoated
Solid carbide
47 mm
PROMAT
4.5 mm
80 mm
118 °
DIN 6535 HA
DIN 338
N
4000861217
Uncoated
Solid carbide
52 mm
PROMAT
4.8 mm
86 mm
118 °
DIN 6535 HA
DIN 338
N
4000861220
Uncoated
Solid carbide
57 mm
PROMAT
5.5 mm
93 mm
118 °
DIN 6535 HA
DIN 338
N
4000861222
Uncoated
Solid carbide
57 mm
PROMAT
6 mm
93 mm
118 °
DIN 6535 HA
DIN 338
N
4000861226
Uncoated
Solid carbide
69 mm
PROMAT
6.8 mm
109 mm
118 °
DIN 6535 HA
DIN 338
N
4000861228
Uncoated
Solid carbide
69 mm
PROMAT
7 mm
109 mm
118 °
DIN 6535 HA
DIN 338
N
4000861232
Uncoated
Solid carbide
75 mm
PROMAT
8 mm
117 mm
118 °
DIN 6535 HA
DIN 338
N
4000861238
Uncoated
Solid carbide
81 mm
PROMAT
9.5 mm
125 mm
118 °
DIN 6535 HA
DIN 338
N
4000861239
Uncoated
Solid carbide
87 mm
PROMAT
9.8 mm
133 mm
118 °
DIN 6535 HA
DIN 338
N
4000861240
Uncoated
Solid carbide
87 mm
PROMAT
10 mm
133 mm
118 °
DIN 6535 HA
DIN 338
N
4000861242
Uncoated
Solid carbide
87 mm
PROMAT
10.2 mm
133 mm
118 °
DIN 6535 HA
DIN 338
N
4000861252
TiAlN-coated
Solid carbide
24 mm
PROMAT
2 mm
49 mm
118 °
DIN 6535 HA
DIN 338
N
4000861254
TiAlN-coated
Solid carbide
30 mm
PROMAT
2.5 mm
57 mm
118 °
DIN 6535 HA
DIN 338
N
4000861255
TiAlN-coated
Solid carbide
33 mm
PROMAT
2.8 mm
61 mm
118 °
DIN 6535 HA
DIN 338
N
4000861256
TiAlN-coated
Solid carbide
33 mm
PROMAT
3 mm
61 mm
118 °
DIN 6535 HA
DIN 338
N
4000861258
TiAlN-coated
Solid carbide
36 mm
PROMAT
3.3 mm
65 mm
118 °
DIN 6535 HA
DIN 338
N
4000861261
TiAlN-coated
Solid carbide
43 mm
PROMAT
3.8 mm
75 mm
118 °
DIN 6535 HA
DIN 338
N
4000861262
TiAlN-coated
Solid carbide
43 mm
PROMAT
4 mm
75 mm
118 °
DIN 6535 HA
DIN 338
N
4000861264
TiAlN-coated
Solid carbide
43 mm
PROMAT
4.2 mm
75 mm
118 °
DIN 6535 HA
DIN 338
N
4000861268
TiAlN-coated
Solid carbide
52 mm
PROMAT
5 mm
86 mm
118 °
DIN 6535 HA
DIN 338
N
4000861270
TiAlN-coated
Solid carbide
57 mm
PROMAT
5.5 mm
93 mm
118 °
DIN 6535 HA
DIN 338
N
4000861272
TiAlN-coated
Solid carbide
57 mm
PROMAT
6 mm
93 mm
118 °
DIN 6535 HA
DIN 338
N
4000861276
TiAlN-coated
Solid carbide
69 mm
PROMAT
6.8 mm
109 mm
118 °
DIN 6535 HA
DIN 338
N
4000861282
TiAlN-coated
Solid carbide
75 mm
PROMAT
8 mm
117 mm
118 °
DIN 6535 HA
DIN 338
N
4000861284
TiAlN-coated
Solid carbide
75 mm
PROMAT
8.5 mm
117 mm
118 °
DIN 6535 HA
DIN 338
N
4000861298
TiAlN-coated
Solid carbide
101 mm
PROMAT
12 mm
151 mm
118 °
DIN 6535 HA
DIN 338
N
Please select a product variant to specifically search for it in the shops of our dealers.