- Homepage
- Tools
- Chip removal
- Drill bits
- Twist drills
- Twist drills
- Twist drill PROMAT
Tools
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,02mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,03mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,21mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,21mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,02mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,03mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,21mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,21mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,18mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,05mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,09mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,11mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,13mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,15mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,16mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,17mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,18mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,19mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,05mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,09mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,11mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,13mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,15mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,16mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,17mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,18mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,19mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,2mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Description:
Solid carbide · DIN 6539 · Type N · Point angle 118° · With crosswise grinding from Ø 2.0 mm · With straight shank · Right-hand cutting · Extremely robust drill bits for drilling cast steel, grey cast iron, white cast iron, manganese, high-carbon steels, bronzes, light metals, non-ferrous heavy metals, fibre-reinforced plastics and other duroplastics Further technical information: · Feed in steel up to 1000 N: 0,18mm/rev · Quality: Profile-ground · Nominal Ø tolerance: h7 · Overall length: Extra-short
Coating
Cutting material
Length of spiral
Marker
Nominal Ø
Overall length
Point angle
Shank design
Standard
Type
Download
4000860777
Uncoated
Solid carbide
34 mm
PROMAT
7.2 mm
74 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860812
Uncoated
Solid carbide
18 mm
PROMAT
3.2 mm
49 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860832
Uncoated
Solid carbide
26 mm
PROMAT
5.2 mm
62 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860851
TiAlN-coated
Solid carbide
34 mm
PROMAT
7.2 mm
74 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860867
Uncoated
Solid carbide
6 mm
PROMAT
1 mm
26 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860869
Uncoated
Solid carbide
9 mm
PROMAT
1.5 mm
32 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860870
Uncoated
Solid carbide
47 mm
PROMAT
11.5 mm
95 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860871
Uncoated
Solid carbide
51 mm
PROMAT
12.5 mm
102 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860872
Uncoated
Solid carbide
51 mm
PROMAT
13 mm
102 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860873
TiAlN-coated
Solid carbide
6 mm
PROMAT
1 mm
26 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860874
TiAlN-coated
Solid carbide
9 mm
PROMAT
1.5 mm
32 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860875
TiAlN-coated
Solid carbide
47 mm
PROMAT
11.5 mm
95 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860876
TiAlN-coated
Solid carbide
51 mm
PROMAT
12.5 mm
102 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860877
TiAlN-coated
Solid carbide
51 mm
PROMAT
13 mm
102 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860878
Uncoated
Solid carbide
40 mm
PROMAT
8.8 mm
84 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860902
Uncoated
Solid carbide
12 mm
PROMAT
2 mm
38 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860904
Uncoated
Solid carbide
14 mm
PROMAT
2.5 mm
43 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860906
Uncoated
Solid carbide
16 mm
PROMAT
3 mm
46 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860908
Uncoated
Solid carbide
18 mm
PROMAT
3.3 mm
49 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860910
Uncoated
Solid carbide
20 mm
PROMAT
3.5 mm
52 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860912
Uncoated
Solid carbide
22 mm
PROMAT
4 mm
55 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860914
Uncoated
Solid carbide
22 mm
PROMAT
4.2 mm
55 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860916
Uncoated
Solid carbide
24 mm
PROMAT
4.5 mm
58 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860918
Uncoated
Solid carbide
26 mm
PROMAT
5 mm
62 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860920
Uncoated
Solid carbide
28 mm
PROMAT
5.5 mm
66 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860922
Uncoated
Solid carbide
28 mm
PROMAT
6 mm
66 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860924
Uncoated
Solid carbide
31 mm
PROMAT
6.5 mm
70 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860926
Uncoated
Solid carbide
34 mm
PROMAT
6.8 mm
74 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860928
Uncoated
Solid carbide
34 mm
PROMAT
7 mm
74 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860930
Uncoated
Solid carbide
34 mm
PROMAT
7.5 mm
74 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860932
Uncoated
Solid carbide
37 mm
PROMAT
8 mm
79 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860934
Uncoated
Solid carbide
37 mm
PROMAT
8.5 mm
79 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860936
Uncoated
Solid carbide
40 mm
PROMAT
9 mm
84 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860938
Uncoated
Solid carbide
40 mm
PROMAT
9.5 mm
84 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860940
Uncoated
Solid carbide
43 mm
PROMAT
10 mm
89 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860942
Uncoated
Solid carbide
43 mm
PROMAT
10.2 mm
89 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860944
Uncoated
Solid carbide
43 mm
PROMAT
10.5 mm
89 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860946
Uncoated
Solid carbide
47 mm
PROMAT
11 mm
95 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860948
Uncoated
Solid carbide
51 mm
PROMAT
12 mm
102 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860952
TiAlN-coated
Solid carbide
12 mm
PROMAT
2 mm
38 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860954
TiAlN-coated
Solid carbide
14 mm
PROMAT
2.5 mm
43 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860956
TiAlN-coated
Solid carbide
16 mm
PROMAT
3 mm
46 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860958
TiAlN-coated
Solid carbide
18 mm
PROMAT
3.3 mm
49 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860960
TiAlN-coated
Solid carbide
20 mm
PROMAT
3.5 mm
52 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860962
TiAlN-coated
Solid carbide
22 mm
PROMAT
4 mm
55 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860964
TiAlN-coated
Solid carbide
22 mm
PROMAT
4.2 mm
55 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860966
TiAlN-coated
Solid carbide
24 mm
PROMAT
4.5 mm
58 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860968
TiAlN-coated
Solid carbide
26 mm
PROMAT
5 mm
62 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860970
TiAlN-coated
Solid carbide
28 mm
PROMAT
5.5 mm
66 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860972
TiAlN-coated
Solid carbide
28 mm
PROMAT
6 mm
66 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860974
TiAlN-coated
Solid carbide
31 mm
PROMAT
6.5 mm
70 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860976
TiAlN-coated
Solid carbide
34 mm
PROMAT
6.8 mm
74 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860978
TiAlN-coated
Solid carbide
34 mm
PROMAT
7 mm
74 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860980
TiAlN-coated
Solid carbide
34 mm
PROMAT
7.5 mm
74 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860982
TiAlN-coated
Solid carbide
37 mm
PROMAT
8 mm
79 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860984
TiAlN-coated
Solid carbide
37 mm
PROMAT
8.5 mm
79 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860986
TiAlN-coated
Solid carbide
40 mm
PROMAT
9 mm
84 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860988
TiAlN-coated
Solid carbide
40 mm
PROMAT
9.5 mm
84 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860990
TiAlN-coated
Solid carbide
43 mm
PROMAT
10 mm
89 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860992
TiAlN-coated
Solid carbide
43 mm
PROMAT
10.2 mm
89 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860994
TiAlN-coated
Solid carbide
43 mm
PROMAT
10.5 mm
89 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860996
TiAlN-coated
Solid carbide
47 mm
PROMAT
11 mm
95 mm
118 °
DIN 6535 HA
DIN 6539
N
4000860998
TiAlN-coated
Solid carbide
51 mm
PROMAT
12 mm
102 mm
118 °
DIN 6535 HA
DIN 6539
N
4000861312
TiAlN-coated
Solid carbide
18 mm
PROMAT
3.2 mm
49 mm
118 °
DIN 6535 HA
DIN 6539
N
4000861332
TiAlN-coated
Solid carbide
26 mm
PROMAT
5.2 mm
62 mm
118 °
DIN 6535 HA
DIN 6539
N
4000861368
TiAlN-coated
Solid carbide
40 mm
PROMAT
8.8 mm
84 mm
118 °
DIN 6535 HA
DIN 6539
N
Please select a product variant to specifically search for it in the shops of our dealers.