- Homepage
- Tools
- Chip removal
- Drill bits
- Twist drills
- Twist drills
- Twist drill PROMAT
Tools
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,05mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,05mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,06mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,07mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,08mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,09mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,09mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,1mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,11mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,11mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,12mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,13mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,13mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,13mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,13mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,13mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,14mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,15mm/rev · Quality: Profile-ground
Description:
With carbide cutters · DIN 8037 · Type N · Point angle 118° · With straight shank · Right-hand cutting · For drilling spring band steel, white-cast iron, toughened bronzes, hard plastics and heavily abrasive materials Further technical information: · Feed in steel up to 1000 N: 0,16mm/rev · Quality: Profile-ground
Coating
Cutting material
Length of spiral
Marker
Nominal Ø
Overall length
Point angle
Shank design
Standard
Type
Download
4000861401
Uncoated
Carbide
20 mm
PROMAT
3 mm
50 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861402
Uncoated
Carbide
25 mm
PROMAT
3.2 mm
56 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861403
Uncoated
Carbide
25 mm
PROMAT
3.5 mm
56 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861404
Uncoated
Carbide
25 mm
PROMAT
4 mm
56 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861405
Uncoated
Carbide
28 mm
PROMAT
4.2 mm
63 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861406
Uncoated
Carbide
28 mm
PROMAT
4.5 mm
63 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861407
Uncoated
Carbide
28 mm
PROMAT
5 mm
63 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861408
Uncoated
Carbide
32 mm
PROMAT
5.5 mm
71 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861409
Uncoated
Carbide
32 mm
PROMAT
6 mm
71 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861410
Uncoated
Carbide
32 mm
PROMAT
6.5 mm
71 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861411
Uncoated
Carbide
40 mm
PROMAT
7 mm
80 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861412
Uncoated
Carbide
40 mm
PROMAT
7.5 mm
80 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861413
Uncoated
Carbide
40 mm
PROMAT
8 mm
80 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861414
Uncoated
Carbide
50 mm
PROMAT
8.5 mm
90 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861415
Uncoated
Carbide
50 mm
PROMAT
9 mm
90 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861416
Uncoated
Carbide
50 mm
PROMAT
9.5 mm
90 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861417
Uncoated
Carbide
56 mm
PROMAT
10 mm
100 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861418
Uncoated
Carbide
56 mm
PROMAT
10.5 mm
100 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861419
Uncoated
Carbide
56 mm
PROMAT
11 mm
100 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861420
Uncoated
Carbide
63 mm
PROMAT
12 mm
112 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861421
Uncoated
Carbide
63 mm
PROMAT
13 mm
112 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861422
Uncoated
Carbide
71 mm
PROMAT
14 mm
125 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861423
Uncoated
Carbide
71 mm
PROMAT
15 mm
125 mm
118 °
DIN 6535 HA
DIN 8037
N
4000861424
Uncoated
Carbide
80 mm
PROMAT
16 mm
140 mm
118 °
DIN 6535 HA
DIN 8037
N
Please select a product variant to specifically search for it in the shops of our dealers.