- Homepage
- Tools
- Chip removal
- Milling tools
- End mill
- End mill PROMAT
Tools
Description:
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type NR · Multiple cutter · Short · 45° protective chamfer · Centre cut · Relief ground knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Coating
Cutting material
Free grinding
Length of cutting edge
Length of insert
Marker
No. of cutters
Nominal Ø
Overall length
Shank design
Shank Ø
Standard
Type
Download
4000866079
TiCN-coated
HSS-Co5
24 mm
45 mm
63 mm
PROMAT
4
25 mm
121 mm
DIN 1835 B
25 mm
DIN 844
NR
4000866424
Uncoated
HSS-Co5
9,5 mm
22 mm
30 mm
PROMAT
4
10 mm
72 mm
DIN 1835 B
10 mm
DIN 844
NR
4000866426
Uncoated
HSS-Co5
11,5 mm
26 mm
36 mm
PROMAT
4
12 mm
83 mm
DIN 1835 B
12 mm
DIN 844
NR
4000866428
Uncoated
HSS-Co5
11,5 mm
26 mm
36 mm
PROMAT
4
14 mm
83 mm
DIN 1835 B
12 mm
DIN 844
NR
4000866430
Uncoated
HSS-Co5
15 mm
32 mm
42 mm
PROMAT
4
16 mm
92 mm
DIN 1835 B
16 mm
DIN 844
NR
4000866432
Uncoated
HSS-Co5
15 mm
32 mm
42 mm
PROMAT
4
18 mm
92 mm
DIN 1835 B
16 mm
DIN 844
NR
4000866434
Uncoated
HSS-Co5
19 mm
38 mm
52 mm
PROMAT
4
20 mm
104 mm
DIN 1835 B
20 mm
DIN 844
NR
4000866440
TiCN-coated
HSS-Co5
9,5 mm
22 mm
30 mm
PROMAT
4
10 mm
72 mm
DIN 1835 B
10 mm
DIN 844
NR
4000866442
TiCN-coated
HSS-Co5
11,5 mm
26 mm
36 mm
PROMAT
4
12 mm
83 mm
DIN 1835 B
12 mm
DIN 844
NR
4000866444
TiCN-coated
HSS-Co5
11,5 mm
26 mm
36 mm
PROMAT
4
14 mm
83 mm
DIN 1835 B
12 mm
DIN 844
NR
4000866446
TiCN-coated
HSS-Co5
15 mm
32 mm
42 mm
PROMAT
4
16 mm
92 mm
DIN 1835 B
16 mm
DIN 844
NR
4000866448
TiCN-coated
HSS-Co5
15 mm
32 mm
42 mm
PROMAT
4
18 mm
92 mm
DIN 1835 B
16 mm
DIN 844
NR
4000866450
TiCN-coated
HSS-Co5
19 mm
38 mm
52 mm
PROMAT
4
20 mm
104 mm
DIN 1835 B
20 mm
DIN 844
NR
4000866463
Uncoated
HSS-Co5
5,5 mm
13 mm
19 mm
PROMAT
3
6 mm
57 mm
DIN 1835 B
6 mm
DIN 844
NR
4000866465
Uncoated
HSS-Co5
7,5 mm
19 mm
25 mm
PROMAT
3
8 mm
69 mm
DIN 1835 B
10 mm
DIN 844
NR
4000866467
TiCN-coated
HSS-Co5
5,5 mm
13 mm
19 mm
PROMAT
3
6 mm
57 mm
DIN 1835 B
6 mm
DIN 844
NR
4000866469
TiCN-coated
HSS-Co5
7,5 mm
19 mm
25 mm
PROMAT
3
8 mm
69 mm
DIN 1835 B
10 mm
DIN 844
NR
Please select a product variant to specifically search for it in the shops of our dealers.