- Homepage
- Tools
- Chip removal
- Milling tools
- End mill
- End mill PROMAT
Tools
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co8 · DIN 844 · Type N · Four-tipped core drill · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Coating
Cutting material
Free grinding
Length of cutting edge
Length of insert
Marker
No. of cutters
Nominal Ø
Overall length
Shank design
Shank Ø
Standard
Type
Download
4000866320
Uncoated
HSS-Co8
- mm
7 mm
13 mm
PROMAT
4
2 mm
51 mm
DIN 1835 B
6 mm
DIN 844
N
4000866322
Uncoated
HSS-Co8
- mm
8 mm
14 mm
PROMAT
4
3 mm
52 mm
DIN 1835 B
6 mm
DIN 844
N
4000866324
Uncoated
HSS-Co8
- mm
11 mm
17 mm
PROMAT
4
4 mm
55 mm
DIN 1835 B
6 mm
DIN 844
N
4000866326
Uncoated
HSS-Co8
- mm
13 mm
19 mm
PROMAT
4
5 mm
57 mm
DIN 1835 B
6 mm
DIN 844
N
4000866328
Uncoated
HSS-Co8
5,5 mm
13 mm
19 mm
PROMAT
4
6 mm
57 mm
DIN 1835 B
6 mm
DIN 844
N
4000866330
Uncoated
HSS-Co8
7,5 mm
19 mm
25 mm
PROMAT
4
8 mm
69 mm
DIN 1835 B
10 mm
DIN 844
N
4000866332
Uncoated
HSS-Co8
9,5 mm
22 mm
30 mm
PROMAT
4
10 mm
72 mm
DIN 1835 B
10 mm
DIN 844
N
4000866334
Uncoated
HSS-Co8
11,5 mm
26 mm
36 mm
PROMAT
4
12 mm
83 mm
DIN 1835 B
12 mm
DIN 844
N
4000866336
Uncoated
HSS-Co8
11,5 mm
26 mm
36 mm
PROMAT
4
14 mm
83 mm
DIN 1835 B
12 mm
DIN 844
N
4000866338
Uncoated
HSS-Co8
15 mm
32 mm
42 mm
PROMAT
4
16 mm
92 mm
DIN 1835 B
16 mm
DIN 844
N
4000866340
Uncoated
HSS-Co8
15 mm
32 mm
42 mm
PROMAT
4
18 mm
92 mm
DIN 1835 B
16 mm
DIN 844
N
4000866342
Uncoated
HSS-Co8
19 mm
38 mm
52 mm
PROMAT
4
20 mm
104 mm
DIN 1835 B
20 mm
DIN 844
N
4000866344
TiCN-coated
HSS-Co8
- mm
7 mm
13 mm
PROMAT
4
2 mm
51 mm
DIN 1835 B
6 mm
DIN 844
N
4000866346
TiCN-coated
HSS-Co8
- mm
8 mm
14 mm
PROMAT
4
3 mm
52 mm
DIN 1835 B
6 mm
DIN 844
N
4000866348
TiCN-coated
HSS-Co8
- mm
11 mm
17 mm
PROMAT
4
4 mm
55 mm
DIN 1835 B
6 mm
DIN 844
N
4000866350
TiCN-coated
HSS-Co8
- mm
13 mm
19 mm
PROMAT
4
5 mm
57 mm
DIN 1835 B
6 mm
DIN 844
N
4000866352
TiCN-coated
HSS-Co8
5,5 mm
13 mm
19 mm
PROMAT
4
6 mm
57 mm
DIN 1835 B
6 mm
DIN 844
N
4000866354
TiCN-coated
HSS-Co8
7,5 mm
19 mm
25 mm
PROMAT
4
8 mm
69 mm
DIN 1835 B
10 mm
DIN 844
N
4000866356
TiCN-coated
HSS-Co8
9,5 mm
22 mm
30 mm
PROMAT
4
10 mm
72 mm
DIN 1835 B
10 mm
DIN 844
N
4000866358
TiCN-coated
HSS-Co8
11,5 mm
26 mm
36 mm
PROMAT
4
12 mm
83 mm
DIN 1835 B
12 mm
DIN 844
N
4000866360
TiCN-coated
HSS-Co8
11,5 mm
26 mm
36 mm
PROMAT
4
14 mm
83 mm
DIN 1835 B
12 mm
DIN 844
N
4000866362
TiCN-coated
HSS-Co8
15 mm
32 mm
42 mm
PROMAT
4
16 mm
92 mm
DIN 1835 B
16 mm
DIN 844
N
4000866364
TiCN-coated
HSS-Co8
15 mm
32 mm
42 mm
PROMAT
4
18 mm
92 mm
DIN 1835 B
16 mm
DIN 844
N
4000866366
TiCN-coated
HSS-Co8
19 mm
38 mm
52 mm
PROMAT
4
20 mm
104 mm
DIN 1835 B
20 mm
DIN 844
N
Please select a product variant to specifically search for it in the shops of our dealers.