- Homepage
- Tools
- Chip removal
- Countersink drill bits
- Countersink drill bitsand deburrers
- Countersink
- Countersink PROMAT
Tools
Description:
HSS · Nano-coated · DIN 335 C · 3 cutters · Countersink angle 90° · Shank with 3 clamping areas from nominal Ø 8.3 mm · Right-hand cutting · Variable rear grinding · For the processing of steel, rust- and heat-resistant steels, aluminium, brass and plastics · Advantages: · Significantly less feeding force required · Up to 60 % higher service lives · Up to 30 % faster lowering · Extremely quiet running · Optimised countersink · Very high resistance to wear and heat hardness Through especially developed chip space parameters, variably running rear grinding and special nano-coating Further technical information: · Feed in steel up to 800 N: 0,15mm/rev
Description:
HSS · Nano-coated · DIN 335 C · 3 cutters · Countersink angle 90° · Shank with 3 clamping areas from nominal Ø 8.3 mm · Right-hand cutting · Variable rear grinding · For the processing of steel, rust- and heat-resistant steels, aluminium, brass and plastics · Advantages: · Significantly less feeding force required · Up to 60 % higher service lives · Up to 30 % faster lowering · Extremely quiet running · Optimised countersink · Very high resistance to wear and heat hardness Through especially developed chip space parameters, variably running rear grinding and special nano-coating Further technical information: · Feed in steel up to 800 N: 0,15mm/rev
Description:
HSS · Nano-coated · DIN 335 C · 3 cutters · Countersink angle 90° · Shank with 3 clamping areas from nominal Ø 8.3 mm · Right-hand cutting · Variable rear grinding · For the processing of steel, rust- and heat-resistant steels, aluminium, brass and plastics · Advantages: · Significantly less feeding force required · Up to 60 % higher service lives · Up to 30 % faster lowering · Extremely quiet running · Optimised countersink · Very high resistance to wear and heat hardness Through especially developed chip space parameters, variably running rear grinding and special nano-coating Further technical information: · Feed in steel up to 800 N: 0,15mm/rev
Description:
HSS · Nano-coated · DIN 335 C · 3 cutters · Countersink angle 90° · Shank with 3 clamping areas from nominal Ø 8.3 mm · Right-hand cutting · Variable rear grinding · For the processing of steel, rust- and heat-resistant steels, aluminium, brass and plastics · Advantages: · Significantly less feeding force required · Up to 60 % higher service lives · Up to 30 % faster lowering · Extremely quiet running · Optimised countersink · Very high resistance to wear and heat hardness Through especially developed chip space parameters, variably running rear grinding and special nano-coating Further technical information: · Feed in steel up to 800 N: 0,15mm/rev
Description:
HSS · Nano-coated · DIN 335 C · 3 cutters · Countersink angle 90° · Shank with 3 clamping areas from nominal Ø 8.3 mm · Right-hand cutting · Variable rear grinding · For the processing of steel, rust- and heat-resistant steels, aluminium, brass and plastics · Advantages: · Significantly less feeding force required · Up to 60 % higher service lives · Up to 30 % faster lowering · Extremely quiet running · Optimised countersink · Very high resistance to wear and heat hardness Through especially developed chip space parameters, variably running rear grinding and special nano-coating Further technical information: · Feed in steel up to 800 N: 0,15mm/rev
Description:
HSS · Nano-coated · DIN 335 C · 3 cutters · Countersink angle 90° · Shank with 3 clamping areas from nominal Ø 8.3 mm · Right-hand cutting · Variable rear grinding · For the processing of steel, rust- and heat-resistant steels, aluminium, brass and plastics · Advantages: · Significantly less feeding force required · Up to 60 % higher service lives · Up to 30 % faster lowering · Extremely quiet running · Optimised countersink · Very high resistance to wear and heat hardness Through especially developed chip space parameters, variably running rear grinding and special nano-coating Further technical information: · Feed in steel up to 800 N: 0,2mm/rev
Description:
HSS · Nano-coated · DIN 335 C · 3 cutters · Countersink angle 90° · Shank with 3 clamping areas from nominal Ø 8.3 mm · Right-hand cutting · Variable rear grinding · For the processing of steel, rust- and heat-resistant steels, aluminium, brass and plastics · Advantages: · Significantly less feeding force required · Up to 60 % higher service lives · Up to 30 % faster lowering · Extremely quiet running · Optimised countersink · Very high resistance to wear and heat hardness Through especially developed chip space parameters, variably running rear grinding and special nano-coating Further technical information: · Feed in steel up to 800 N: 0,2mm/rev
Description:
HSS · Nano-coated · DIN 335 C · 3 cutters · Countersink angle 90° · Shank with 3 clamping areas from nominal Ø 8.3 mm · Right-hand cutting · Variable rear grinding · For the processing of steel, rust- and heat-resistant steels, aluminium, brass and plastics · Advantages: · Significantly less feeding force required · Up to 60 % higher service lives · Up to 30 % faster lowering · Extremely quiet running · Optimised countersink · Very high resistance to wear and heat hardness Through especially developed chip space parameters, variably running rear grinding and special nano-coating Further technical information: · Feed in steel up to 800 N: 0,2mm/rev
Description:
HSS · Nano-coated · DIN 335 C · 3 cutters · Countersink angle 90° · Shank with 3 clamping areas from nominal Ø 8.3 mm · Right-hand cutting · Variable rear grinding · For the processing of steel, rust- and heat-resistant steels, aluminium, brass and plastics · Advantages: · Significantly less feeding force required · Up to 60 % higher service lives · Up to 30 % faster lowering · Extremely quiet running · Optimised countersink · Very high resistance to wear and heat hardness Through especially developed chip space parameters, variably running rear grinding and special nano-coating Further technical information: · Feed in steel up to 800 N: 0,2mm/rev
Description:
HSS · Nano-coated · DIN 335 C · 3 cutters · Countersink angle 90° · Shank with 3 clamping areas from nominal Ø 8.3 mm · Right-hand cutting · Variable rear grinding · For the processing of steel, rust- and heat-resistant steels, aluminium, brass and plastics · Advantages: · Significantly less feeding force required · Up to 60 % higher service lives · Up to 30 % faster lowering · Extremely quiet running · Optimised countersink · Very high resistance to wear and heat hardness Through especially developed chip space parameters, variably running rear grinding and special nano-coating Further technical information: · Feed in steel up to 800 N: 0,2mm/rev
Description:
HSS · Nano-coated · DIN 335 C · 3 cutters · Countersink angle 90° · Shank with 3 clamping areas from nominal Ø 8.3 mm · Right-hand cutting · Variable rear grinding · For the processing of steel, rust- and heat-resistant steels, aluminium, brass and plastics · Advantages: · Significantly less feeding force required · Up to 60 % higher service lives · Up to 30 % faster lowering · Extremely quiet running · Optimised countersink · Very high resistance to wear and heat hardness Through especially developed chip space parameters, variably running rear grinding and special nano-coating Further technical information: · Feed in steel up to 800 N: 0,2mm/rev
Coating
Countersink angle
Cutting material
Marker
No. of cutters
Nominal Ø
Overall length
Shank design
Shank Ø
Small Ø
Standard
Download
4000865175
Nano-coated
90 °
HSS
PROMAT
3
6.3 mm
45 mm
Cylindrical
5 mm
1.5 mm
DIN 335 C
4000865176
Nano-coated
90 °
HSS
PROMAT
3
8.3 mm
50 mm
3-surface shank
6 mm
2 mm
DIN 335 C
4000865177
Nano-coated
90 °
HSS
PROMAT
3
10.4 mm
50 mm
3-surface shank
6 mm
2.5 mm
DIN 335 C
4000865178
Nano-coated
90 °
HSS
PROMAT
3
12.4 mm
56 mm
3-surface shank
8 mm
2.8 mm
DIN 335 C
4000865179
Nano-coated
90 °
HSS
PROMAT
3
15 mm
60 mm
3-surface shank
10 mm
3.2 mm
DIN 335 C
4000865180
Nano-coated
90 °
HSS
PROMAT
3
16.5 mm
60 mm
3-surface shank
10 mm
3.2 mm
DIN 335 C
4000865181
Nano-coated
90 °
HSS
PROMAT
3
19 mm
63 mm
3-surface shank
10 mm
3.5 mm
DIN 335 C
4000865182
Nano-coated
90 °
HSS
PROMAT
3
20.5 mm
63 mm
3-surface shank
10 mm
3.5 mm
DIN 335 C
4000865183
Nano-coated
90 °
HSS
PROMAT
3
23 mm
67 mm
3-surface shank
10 mm
3.8 mm
DIN 335 C
4000865184
Nano-coated
90 °
HSS
PROMAT
3
25 mm
67 mm
3-surface shank
10 mm
3.8 mm
DIN 335 C
4000865185
Nano-coated
90 °
HSS
PROMAT
3
31 mm
71 mm
3-surface shank
12 mm
4.2 mm
DIN 335 C
Please select a product variant to specifically search for it in the shops of our dealers.