- Homepage
- Tools
- Chip removal
- Countersink drill bits
- Counterbore
- Counterbore PROMAT
Tools
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: Fine quality grade for through-hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,14mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: Fine quality grade for through-hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,16mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: Fine quality grade for through-hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,16mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: Fine quality grade for through-hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,2mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: Fine quality grade for through-hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,2mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: Fine quality grade for through-hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,2mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: Fine quality grade for through-hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,2mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: Medium quality grade for through-hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,14mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: Medium quality grade for through-hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,16mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: Medium quality grade for through-hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,16mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: Medium quality grade for through-hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,2mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: Medium quality grade for through-hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,2mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: Medium quality grade for through-hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,2mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: Medium quality grade for through-hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,2mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: For core hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,14mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: For core hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,16mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: For core hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,16mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: For core hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,2mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: For core hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,2mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: For core hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,2mm/rev
Description:
HSS · DIN 373 · With straight shank and fixed guide pin · Countersink angle 180° · For making countersinks for cylinder head screws, hexagon screws, and nuts · Ideal for burr and chatter-free sinks in steel and cast iron as well as non-ferrous and light metals · Best results at low cutting speed Further technical information: · Quality grade: For core hole · No. of cutters: 3 · Feed in steel up to 500 N: 0,2mm/rev
Coating
Countersink angle
Cutting material
For thread
Head Ø
Marker
Overall length
Shank Ø
Spigot Ø
Standard
Download
4000865331
Uncoated
180 °
HSS
M3
6 mm
PROMAT
71 mm
5 mm
3,2 mm
DIN 373
4000865332
Uncoated
180 °
HSS
M4
8 mm
PROMAT
71 mm
5 mm
4,3 mm
DIN 373
4000865333
Uncoated
180 °
HSS
M5
10 mm
PROMAT
80 mm
8 mm
5,3 mm
DIN 373
4000865334
Uncoated
180 °
HSS
M6
11 mm
PROMAT
80 mm
8 mm
6,4 mm
DIN 373
4000865335
Uncoated
180 °
HSS
M8
15 mm
PROMAT
100 mm
12.5 mm
8,4 mm
DIN 373
4000865336
Uncoated
180 °
HSS
M10
18 mm
PROMAT
100 mm
12.5 mm
10,5 mm
DIN 373
4000865337
Uncoated
180 °
HSS
M12
20 mm
PROMAT
100 mm
12.5 mm
13 mm
DIN 373
4000865338
Uncoated
180 °
HSS
M3
6 mm
PROMAT
71 mm
5 mm
3,4 mm
DIN 373
4000865339
Uncoated
180 °
HSS
M4
8 mm
PROMAT
71 mm
5 mm
4,5 mm
DIN 373
4000865340
Uncoated
180 °
HSS
M5
10 mm
PROMAT
80 mm
8 mm
5,5 mm
DIN 373
4000865341
Uncoated
180 °
HSS
M6
11 mm
PROMAT
80 mm
8 mm
6,6 mm
DIN 373
4000865342
Uncoated
180 °
HSS
M8
15 mm
PROMAT
100 mm
12.5 mm
9 mm
DIN 373
4000865343
Uncoated
180 °
HSS
M10
18 mm
PROMAT
100 mm
12.5 mm
11 mm
DIN 373
4000865344
Uncoated
180 °
HSS
M12
20 mm
PROMAT
100 mm
12.5 mm
13,5 mm
DIN 373
4000865345
Uncoated
180 °
HSS
M3
6 mm
PROMAT
71 mm
5 mm
2,5 mm
DIN 373
4000865346
Uncoated
180 °
HSS
M4
8 mm
PROMAT
71 mm
5 mm
3,3 mm
DIN 373
4000865347
Uncoated
180 °
HSS
M5
10 mm
PROMAT
80 mm
8 mm
4,2 mm
DIN 373
4000865348
Uncoated
180 °
HSS
M6
11 mm
PROMAT
80 mm
8 mm
5 mm
DIN 373
4000865349
Uncoated
180 °
HSS
M8
15 mm
PROMAT
100 mm
12.5 mm
6,8 mm
DIN 373
4000865350
Uncoated
180 °
HSS
M10
18 mm
PROMAT
100 mm
12.5 mm
8,5 mm
DIN 373
4000865351
Uncoated
180 °
HSS
M12
20 mm
PROMAT
100 mm
12.5 mm
10,2 mm
DIN 373
Please select a product variant to specifically search for it in the shops of our dealers.
Search dealer
Your location
Filter
