- Homepage
- Tools
- Chip removal
- Drill bits
- Centre drill bit
- Centre drill bit PROMAT
Tools
Description:
HSS · TiN-coated · DIN 333 · Shape A · Right-hand cutting · Countersink angle 60 ° · For producing centring holes according to DIN 332 without protective chamfer · For general use Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Countersink angle: 60°
Description:
HSS · TiN-coated · DIN 333 · Shape A · Right-hand cutting · Countersink angle 60 ° · For producing centring holes according to DIN 332 without protective chamfer · For general use Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Countersink angle: 60°
Description:
HSS · TiN-coated · DIN 333 · Shape A · Right-hand cutting · Countersink angle 60 ° · For producing centring holes according to DIN 332 without protective chamfer · For general use Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Countersink angle: 60°
Description:
HSS · TiN-coated · DIN 333 · Shape A · Right-hand cutting · Countersink angle 60 ° · For producing centring holes according to DIN 332 without protective chamfer · For general use Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Countersink angle: 60°
Description:
HSS · TiN-coated · DIN 333 · Shape A · Right-hand cutting · Countersink angle 60 ° · For producing centring holes according to DIN 332 without protective chamfer · For general use Further technical information: · Feed in steel up to 800 N: 0,03mm/rev · Countersink angle: 60°
Description:
HSS · TiN-coated · DIN 333 · Shape A · Right-hand cutting · Countersink angle 60 ° · For producing centring holes according to DIN 332 without protective chamfer · For general use Further technical information: · Feed in steel up to 800 N: 0,03mm/rev · Countersink angle: 60°
Description:
HSS · TiN-coated · DIN 333 · Shape A · Right-hand cutting · Countersink angle 60 ° · For producing centring holes according to DIN 332 without protective chamfer · For general use Further technical information: · Feed in steel up to 800 N: 0,03mm/rev · Countersink angle: 60°
Description:
HSS · TiN-coated · DIN 333 · Shape A · Right-hand cutting · Countersink angle 60 ° · For producing centring holes according to DIN 332 without protective chamfer · For general use Further technical information: · Feed in steel up to 800 N: 0,04mm/rev · Countersink angle: 60°
Coating
Cutting direction
Cutting material
Marker
Nominal Ø
Overall length
Shank Ø
Shape
Standard
Download
4000861586
TiN-coated
Right-hand cutting
HSS
PROMAT
1 mm
31.5 mm
3.15 mm
A
DIN 333
4000861587
TiN-coated
Right-hand cutting
HSS
PROMAT
1.25 mm
31.5 mm
3.15 mm
A
DIN 333
4000861588
TiN-coated
Right-hand cutting
HSS
PROMAT
1.6 mm
35.5 mm
4 mm
A
DIN 333
4000861589
TiN-coated
Right-hand cutting
HSS
PROMAT
2 mm
40 mm
5 mm
A
DIN 333
4000861590
TiN-coated
Right-hand cutting
HSS
PROMAT
2.5 mm
45 mm
6.3 mm
A
DIN 333
4000861591
TiN-coated
Right-hand cutting
HSS
PROMAT
3.15 mm
50 mm
8 mm
A
DIN 333
4000861592
TiN-coated
Right-hand cutting
HSS
PROMAT
4 mm
56 mm
10 mm
A
DIN 333
4000861593
TiN-coated
Right-hand cutting
HSS
PROMAT
5 mm
63 mm
12.5 mm
A
DIN 333
Please select a product variant to specifically search for it in the shops of our dealers.