- Homepage
- Tools
- Chip removal
- Drill bits
- Centre drill bit
- Centre drill bit PROMAT
Tools
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,03mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,03mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,03mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,02mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,03mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,03mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,03mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,04mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,05mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,01mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,01mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,06mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,09mm/rev · Countersink angle: 60°
Description:
HSS · DIN 333 · Shape A · Countersink angle 60° · For producing centring holes according to DIN 332 without protective chamfer · For general use · Further technical information: · Feed in steel up to 800 N: 0,11mm/rev · Countersink angle: 60°
Coating
Cutting direction
Cutting material
Marker
Nominal Ø
Overall length
Shank Ø
Shape
Standard
Download
4000861570
Uncoated
Left-cutting
HSS
PROMAT
1.6 mm
35.5 mm
4 mm
A
DIN 333
4000861571
Uncoated
Left-cutting
HSS
PROMAT
2 mm
40 mm
5 mm
A
DIN 333
4000861572
Uncoated
Left-cutting
HSS
PROMAT
2.5 mm
45 mm
6.3 mm
A
DIN 333
4000861573
Uncoated
Left-cutting
HSS
PROMAT
3.15 mm
50 mm
8 mm
A
DIN 333
4000861574
Uncoated
Left-cutting
HSS
PROMAT
4 mm
56 mm
10 mm
A
DIN 333
4000861802
Uncoated
Right-hand cutting
HSS
PROMAT
1 mm
31.5 mm
3.15 mm
A
DIN 333
4000861803
Uncoated
Right-hand cutting
HSS
PROMAT
1.25 mm
31.5 mm
3.15 mm
A
DIN 333
4000861804
Uncoated
Right-hand cutting
HSS
PROMAT
1.6 mm
35.5 mm
4 mm
A
DIN 333
4000861805
Uncoated
Right-hand cutting
HSS
PROMAT
2 mm
40 mm
5 mm
A
DIN 333
4000861806
Uncoated
Right-hand cutting
HSS
PROMAT
2.5 mm
45 mm
6.3 mm
A
DIN 333
4000861807
Uncoated
Right-hand cutting
HSS
PROMAT
3.15 mm
50 mm
8 mm
A
DIN 333
4000861808
Uncoated
Right-hand cutting
HSS
PROMAT
4 mm
56 mm
10 mm
A
DIN 333
4000861809
Uncoated
Right-hand cutting
HSS
PROMAT
5 mm
63 mm
12.5 mm
A
DIN 333
4000861810
Uncoated
Right-hand cutting
HSS
PROMAT
6.3 mm
71 mm
16 mm
A
DIN 333
4111651050
Uncoated
Right-hand cutting
HSS
PROMAT
0.5 mm
25 mm
3.15 mm
A
DIN 333
4111651080
Uncoated
Right-hand cutting
HSS
PROMAT
0.8 mm
25 mm
3.15 mm
A
DIN 333
4111651800
Uncoated
Right-hand cutting
HSS
PROMAT
8 mm
80 mm
20 mm
A
DIN 333
4111651900
Uncoated
Right-hand cutting
HSS
PROMAT
10 mm
100 mm
25 mm
A
DIN 333
4111651925
Uncoated
Right-hand cutting
HSS
PROMAT
12.5 mm
125 mm
31.5 mm
A
DIN 333
Please select a product variant to specifically search for it in the shops of our dealers.