- Homepage
- Tools
- Chip removal
- Milling tools
- Spiral flute router bit
- Drill groove milling cutter PROMAT
Tools
Description:
HSS-Co8 · DIN 327 D · Type N · Two-flute cutter · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · For milling narrow and form-fitting clearances as well as feather key grooves with greater depth Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shape: D · Material qualification of special alloys: Somewhat suitable · Shank Ø: 6mm · Material qualification NF metals: Somewhat suitable · Free grinding: -mm
Description:
HSS-Co8 · DIN 327 D · Type N · Two-flute cutter · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · For milling narrow and form-fitting clearances as well as feather key grooves with greater depth Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shape: D · Material qualification of special alloys: Somewhat suitable · Shank Ø: 6mm · Material qualification NF metals: Somewhat suitable · Free grinding: -mm
Description:
HSS-Co8 · DIN 327 D · Type N · Two-flute cutter · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · For milling narrow and form-fitting clearances as well as feather key grooves with greater depth Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shape: D · Material qualification of special alloys: Somewhat suitable · Shank Ø: 6mm · Material qualification NF metals: Somewhat suitable · Free grinding: -mm
Description:
HSS-Co8 · DIN 327 D · Type N · Two-flute cutter · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · For milling narrow and form-fitting clearances as well as feather key grooves with greater depth Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shape: D · Material qualification of special alloys: Somewhat suitable · Shank Ø: 6mm · Material qualification NF metals: Somewhat suitable · Free grinding: -mm
Description:
HSS-Co8 · DIN 327 D · Type N · Two-flute cutter · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · For milling narrow and form-fitting clearances as well as feather key grooves with greater depth Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shape: D · Material qualification of special alloys: Somewhat suitable · Shank Ø: 6mm · Material qualification NF metals: Somewhat suitable · Free grinding: 5,5mm
Description:
HSS-Co8 · DIN 327 D · Type N · Two-flute cutter · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · For milling narrow and form-fitting clearances as well as feather key grooves with greater depth Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shape: D · Material qualification of special alloys: Somewhat suitable · Shank Ø: 10mm · Material qualification NF metals: Somewhat suitable · Free grinding: 7,5mm
Description:
HSS-Co8 · DIN 327 D · Type N · Two-flute cutter · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · For milling narrow and form-fitting clearances as well as feather key grooves with greater depth Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shape: D · Material qualification of special alloys: Somewhat suitable · Shank Ø: 10mm · Material qualification NF metals: Somewhat suitable · Free grinding: 9,5mm
Description:
HSS-Co8 · DIN 327 D · Type N · Two-flute cutter · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · For milling narrow and form-fitting clearances as well as feather key grooves with greater depth Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shape: D · Material qualification of special alloys: Somewhat suitable · Shank Ø: 12mm · Material qualification NF metals: Somewhat suitable · Free grinding: 11,5mm
Description:
HSS-Co8 · DIN 327 D · Type N · Two-flute cutter · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · For milling narrow and form-fitting clearances as well as feather key grooves with greater depth Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shape: D · Material qualification of special alloys: Somewhat suitable · Shank Ø: 12mm · Material qualification NF metals: Somewhat suitable · Free grinding: 11,5mm
Description:
HSS-Co8 · DIN 327 D · Type N · Two-flute cutter · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · For milling narrow and form-fitting clearances as well as feather key grooves with greater depth Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shape: D · Material qualification of special alloys: Somewhat suitable · Shank Ø: 16mm · Material qualification NF metals: Somewhat suitable · Free grinding: 15mm
Description:
HSS-Co8 · DIN 327 D · Type N · Two-flute cutter · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · For milling narrow and form-fitting clearances as well as feather key grooves with greater depth Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shape: D · Material qualification of special alloys: Somewhat suitable · Shank Ø: 16mm · Material qualification NF metals: Somewhat suitable · Free grinding: 15mm
Description:
HSS-Co8 · DIN 327 D · Type N · Two-flute cutter · Short · Centre cut · Straight shank with pulling face · Right-hand cutting · For the milling of materials with small and medium strength to approx. 800 N/mm², with uncoated tool and 1,000 N/mm² with coated tool · For milling narrow and form-fitting clearances as well as feather key grooves with greater depth Further technical information: · Material qualification INOX stainless steel: Very suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Shape: D · Material qualification of special alloys: Somewhat suitable · Shank Ø: 20mm · Material qualification NF metals: Somewhat suitable · Free grinding: 19mm
Coating
Cutting material
Length of cutting edge
Length of insert
Marker
No. of cutters
Nominal Ø
Overall length
Shank design
Standard
Type
Download
4000866104
TiCN-coated
HSS-Co8
4 mm
10 mm
PROMAT
2
2 mm
48 mm
DIN 1835 B
DIN 327
N
4000866106
TiCN-coated
HSS-Co8
5 mm
11 mm
PROMAT
2
3 mm
49 mm
DIN 1835 B
DIN 327
N
4000866108
TiCN-coated
HSS-Co8
7 mm
13 mm
PROMAT
2
4 mm
51 mm
DIN 1835 B
DIN 327
N
4000866110
TiCN-coated
HSS-Co8
8 mm
14 mm
PROMAT
2
5 mm
52 mm
DIN 1835 B
DIN 327
N
4000866112
TiCN-coated
HSS-Co8
8 mm
14 mm
PROMAT
2
6 mm
52 mm
DIN 1835 B
DIN 327
N
4000866114
TiCN-coated
HSS-Co8
11 mm
17 mm
PROMAT
2
8 mm
61 mm
DIN 1835 B
DIN 327
N
4000866116
TiCN-coated
HSS-Co8
13 mm
21 mm
PROMAT
2
10 mm
63 mm
DIN 1835 B
DIN 327
N
4000866118
TiCN-coated
HSS-Co8
16 mm
26 mm
PROMAT
2
12 mm
73 mm
DIN 1835 B
DIN 327
N
4000866120
TiCN-coated
HSS-Co8
16 mm
26 mm
PROMAT
2
14 mm
73 mm
DIN 1835 B
DIN 327
N
4000866122
TiCN-coated
HSS-Co8
19 mm
29 mm
PROMAT
2
16 mm
79 mm
DIN 1835 B
DIN 327
N
4000866124
TiCN-coated
HSS-Co8
19 mm
29 mm
PROMAT
2
18 mm
79 mm
DIN 1835 B
DIN 327
N
4000866126
TiCN-coated
HSS-Co8
22 mm
36 mm
PROMAT
2
20 mm
88 mm
DIN 1835 B
DIN 327
N
Please select a product variant to specifically search for it in the shops of our dealers.