- Homepage
- Chemicals
- Chip removal
- Milling tools
- End mill
- End mill PROMAT
Chemicals
Description:
Solid carbide · Special coating · DIN 6527 L · Type W · Multiple cutter · Long · 45° protective chamfer · Centre cut · With straight shank in accordance with DIN 6535 HB · 45 ° Angle of twist (Z.2) · Right-hand cutting · Neck free grinding · Suitable for roughing and smoothing aluminium, copper and other non-ferrous metals · Special TiAlN-coating prevents sticking of the cutters Further technical information: · Angle of twist: 45° · Protective chamfer: 0.06mm · Material qualification NF metals: Very suitable
Description:
Solid carbide · Special coating · DIN 6527 L · Type W · Multiple cutter · Long · 45° protective chamfer · Centre cut · With straight shank in accordance with DIN 6535 HB · 45 ° Angle of twist (Z.2) · Right-hand cutting · Neck free grinding · Suitable for roughing and smoothing aluminium, copper and other non-ferrous metals · Special TiAlN-coating prevents sticking of the cutters Further technical information: · Angle of twist: 45° · Protective chamfer: 0.1mm · Material qualification NF metals: Very suitable
Description:
Solid carbide · Special coating · DIN 6527 L · Type W · Multiple cutter · Long · 45° protective chamfer · Centre cut · With straight shank in accordance with DIN 6535 HB · 45 ° Angle of twist (Z.2) · Right-hand cutting · Neck free grinding · Suitable for roughing and smoothing aluminium, copper and other non-ferrous metals · Special TiAlN-coating prevents sticking of the cutters Further technical information: · Angle of twist: 45° · Protective chamfer: 0.1mm · Material qualification NF metals: Very suitable
Description:
Solid carbide · Special coating · DIN 6527 L · Type W · Multiple cutter · Long · 45° protective chamfer · Centre cut · With straight shank in accordance with DIN 6535 HB · 45 ° Angle of twist (Z.2) · Right-hand cutting · Neck free grinding · Suitable for roughing and smoothing aluminium, copper and other non-ferrous metals · Special TiAlN-coating prevents sticking of the cutters Further technical information: · Angle of twist: 45° · Protective chamfer: 0.15mm · Material qualification NF metals: Very suitable
Description:
Solid carbide · Special coating · DIN 6527 L · Type W · Multiple cutter · Long · 45° protective chamfer · Centre cut · With straight shank in accordance with DIN 6535 HB · 38/40 ° Angle of twist (Z.3) · Right-hand cutting · Neck free grinding · Suitable for roughing and smoothing aluminium, copper and other non-ferrous metals · Special TiAlN-coating prevents sticking of the cutters · Z.3 with uneven twist pitch for low-vibration operation and high quality of finish Further technical information: · Angle of twist: 38/40° · Protective chamfer: 0.125mm · Material qualification NF metals: Very suitable
Description:
Solid carbide · Special coating · DIN 6527 L · Type W · Multiple cutter · Long · 45° protective chamfer · Centre cut · With straight shank in accordance with DIN 6535 HB · 38/40 ° Angle of twist (Z.3) · Right-hand cutting · Neck free grinding · Suitable for roughing and smoothing aluminium, copper and other non-ferrous metals · Special TiAlN-coating prevents sticking of the cutters · Z.3 with uneven twist pitch for low-vibration operation and high quality of finish Further technical information: · Angle of twist: 38/40° · Protective chamfer: 0.125mm · Material qualification NF metals: Very suitable
Description:
Solid carbide · Special coating · DIN 6527 L · Type W · Multiple cutter · Long · 45° protective chamfer · Centre cut · With straight shank in accordance with DIN 6535 HB · 38/40 ° Angle of twist (Z.3) · Right-hand cutting · Neck free grinding · Suitable for roughing and smoothing aluminium, copper and other non-ferrous metals · Special TiAlN-coating prevents sticking of the cutters · Z.3 with uneven twist pitch for low-vibration operation and high quality of finish Further technical information: · Angle of twist: 38/40° · Protective chamfer: 0.2mm · Material qualification NF metals: Very suitable
Description:
Solid carbide · Special coating · DIN 6527 L · Type W · Multiple cutter · Long · 45° protective chamfer · Centre cut · With straight shank in accordance with DIN 6535 HB · 38/40 ° Angle of twist (Z.3) · Right-hand cutting · Neck free grinding · Suitable for roughing and smoothing aluminium, copper and other non-ferrous metals · Special TiAlN-coating prevents sticking of the cutters · Z.3 with uneven twist pitch for low-vibration operation and high quality of finish Further technical information: · Angle of twist: 38/40° · Protective chamfer: 0.2mm · Material qualification NF metals: Very suitable
Description:
Solid carbide · Special coating · DIN 6527 L · Type W · Multiple cutter · Long · 45° protective chamfer · Centre cut · With straight shank in accordance with DIN 6535 HB · 38/40 ° Angle of twist (Z.3) · Right-hand cutting · Neck free grinding · Suitable for roughing and smoothing aluminium, copper and other non-ferrous metals · Special TiAlN-coating prevents sticking of the cutters · Z.3 with uneven twist pitch for low-vibration operation and high quality of finish Further technical information: · Angle of twist: 38/40° · Protective chamfer: 0.2mm · Material qualification NF metals: Very suitable
Description:
Solid carbide · Special coating · DIN 6527 L · Type W · Multiple cutter · Long · 45° protective chamfer · Centre cut · With straight shank in accordance with DIN 6535 HB · 38/40 ° Angle of twist (Z.3) · Right-hand cutting · Neck free grinding · Suitable for roughing and smoothing aluminium, copper and other non-ferrous metals · Special TiAlN-coating prevents sticking of the cutters · Z.3 with uneven twist pitch for low-vibration operation and high quality of finish Further technical information: · Angle of twist: 38/40° · Protective chamfer: 0.3mm · Material qualification NF metals: Very suitable
Coating
Cutting material
Free grinding
Length of cutting edge
Length of insert
Marker
No. of cutters
Nominal Ø
Overall length
Shank design
Shank Ø
Standard
Type
Download
4000806561
Special coating
Solid carbide
1,9 mm
6 mm
10 mm
PROMAT
2
2 mm
57 mm
DIN 6535 HB
6 mm
DIN 6527 L
W
4000806562
Special coating
Solid carbide
2,9 mm
7 mm
14 mm
PROMAT
2
3 mm
57 mm
DIN 6535 HB
6 mm
DIN 6527 L
W
4000806563
Special coating
Solid carbide
3,8 mm
8 mm
18 mm
PROMAT
2
4 mm
57 mm
DIN 6535 HB
6 mm
DIN 6527 L
W
4000806564
Special coating
Solid carbide
4,8 mm
10 mm
19 mm
PROMAT
2
5 mm
57 mm
DIN 6535 HB
6 mm
DIN 6527 L
W
4000806565
Special coating
Solid carbide
5,8 mm
13 mm
20 mm
PROMAT
3
6 mm
57 mm
DIN 6535 HB
6 mm
DIN 6527 L
W
4000806566
Special coating
Solid carbide
7,7 mm
19 mm
25 mm
PROMAT
3
8 mm
63 mm
DIN 6535 HB
8 mm
DIN 6527 L
W
4000806567
Special coating
Solid carbide
9,5 mm
22 mm
30 mm
PROMAT
3
10 mm
72 mm
DIN 6535 HB
10 mm
DIN 6527 L
W
4000806568
Special coating
Solid carbide
11,5 mm
26 mm
35 mm
PROMAT
3
12 mm
83 mm
DIN 6535 HB
12 mm
DIN 6527 L
W
4000806569
Special coating
Solid carbide
15,5 mm
32 mm
40 mm
PROMAT
3
16 mm
92 mm
DIN 6535 HB
16 mm
DIN 6527 L
W
4000806570
Special coating
Solid carbide
19,5 mm
38 mm
50 mm
PROMAT
3
20 mm
104 mm
DIN 6535 HB
20 mm
DIN 6527 L
W
Please select a product variant to specifically search for it in the shops of our dealers.