- Homepage
- Chemicals
- Chip removal
- Milling tools
- End mill
- End mill PROMAT
Chemicals
Description:
HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Description:
HSS-Co5 · DIN 844 · Type HR · Four-tipped core drill · Short · 45° protective chamfer · Centre cut · Relief ground fine knurl profile · Straight shank with pulling face · Right-hand cutting · For the milling of materials with strength to approx. 800 N/mm² with uncoated tool and 1,200 N/mm² with coated tool Further technical information: · Material qualification INOX stainless steel: Somewhat suitable · Material qualification cast: Very suitable · Material qualification steel: Very suitable · Material qualification of special alloys: Somewhat suitable · Material qualification NF metals: Somewhat suitable
Coating
Cutting material
Free grinding
Length of cutting edge
Length of insert
Marker
No. of cutters
Nominal Ø
Overall length
Shank design
Shank Ø
Standard
Type
Download
4000866083
TiCN-coated
HSS-Co5
24 mm
45 mm
63 mm
PROMAT
4
25 mm
121 mm
DIN 1835 B
25 mm
DIN 844
HR
4000866490
Uncoated
HSS-Co5
5,5 mm
13 mm
19 mm
PROMAT
4
6 mm
57 mm
DIN 1835 B
6 mm
DIN 844
HR
4000866492
Uncoated
HSS-Co5
7,5 mm
19 mm
25 mm
PROMAT
4
8 mm
69 mm
DIN 1835 B
10 mm
DIN 844
HR
4000866494
Uncoated
HSS-Co5
9,5 mm
22 mm
30 mm
PROMAT
4
10 mm
72 mm
DIN 1835 B
10 mm
DIN 844
HR
4000866496
Uncoated
HSS-Co5
11,5 mm
26 mm
36 mm
PROMAT
4
12 mm
83 mm
DIN 1835 B
12 mm
DIN 844
HR
4000866498
Uncoated
HSS-Co5
11,5 mm
26 mm
36 mm
PROMAT
4
14 mm
83 mm
DIN 1835 B
12 mm
DIN 844
HR
4000866500
Uncoated
HSS-Co5
15 mm
32 mm
42 mm
PROMAT
4
16 mm
92 mm
DIN 1835 B
16 mm
DIN 844
HR
4000866502
Uncoated
HSS-Co5
15 mm
32 mm
42 mm
PROMAT
4
18 mm
92 mm
DIN 1835 B
16 mm
DIN 844
HR
4000866504
Uncoated
HSS-Co5
19 mm
38 mm
52 mm
PROMAT
4
20 mm
104 mm
DIN 1835 B
20 mm
DIN 844
HR
4000866506
TiCN-coated
HSS-Co5
5,5 mm
13 mm
19 mm
PROMAT
4
6 mm
57 mm
DIN 1835 B
6 mm
DIN 844
HR
4000866508
TiCN-coated
HSS-Co5
7,5 mm
19 mm
25 mm
PROMAT
4
8 mm
69 mm
DIN 1835 B
10 mm
DIN 844
HR
4000866510
TiCN-coated
HSS-Co5
9,5 mm
22 mm
30 mm
PROMAT
4
10 mm
72 mm
DIN 1835 B
10 mm
DIN 844
HR
4000866512
TiCN-coated
HSS-Co5
11,5 mm
26 mm
36 mm
PROMAT
4
12 mm
83 mm
DIN 1835 B
12 mm
DIN 844
HR
4000866514
TiCN-coated
HSS-Co5
11,5 mm
26 mm
36 mm
PROMAT
4
14 mm
83 mm
DIN 1835 B
12 mm
DIN 844
HR
4000866516
TiCN-coated
HSS-Co5
15 mm
32 mm
42 mm
PROMAT
4
16 mm
92 mm
DIN 1835 B
16 mm
DIN 844
HR
4000866518
TiCN-coated
HSS-Co5
15 mm
32 mm
42 mm
PROMAT
4
18 mm
92 mm
DIN 1835 B
16 mm
DIN 844
HR
4000866520
TiCN-coated
HSS-Co5
19 mm
38 mm
52 mm
PROMAT
4
20 mm
104 mm
DIN 1835 B
20 mm
DIN 844
HR
Please select a product variant to specifically search for it in the shops of our dealers.